Quote:
Originally Posted by slvrbullit
Get ready to spend close to a $1k just for headers to fit a 351 in a 94-95 body. So far kooks is the only company that I have seen make them.
|
i did a 351 swap into a coupe not too long ago. i found a 351 2v with the c-8 casting and bought it for 100 bucks. we ported the heads and re seated the valves and what not. put a torker 2 intake with a 650cfm carb and some bbk long tube headers which cost around 400 dollars. and we put a t-5 in it with a 4 cyl rear end still in it.
as far as headers go around 400-600, bucks but i could be wrong about the different body styles between the two.
__________________
13.068 @ 102 with a 1.732 60 ft, 4:30 gears and drag radials, 2.5 inch exaust, x pipe w/ flowmasters, stock motor and trans
Last edited by mrmustangconvert; 11-09-2007 at 01:00 PM.
|