StreetStangs.net - View Single Post

sailorbob · 01-28-2006, 12:43 PM

Hmm, don't know why Clint has got Idle Spark Multiplier at 0x7448, he's also got Spark Retard For Knock Sensor there too. Please bear in mind it's easy to make a mistake in these xdf's, there's a lot of stuff in there! I'm always grateful when someone points these things out.

I think you've sorted out the offset and different bin file size problem, I've posted a reply on the TunerPro forum in more detail on your query.

The value of 255 is, as you say, a disabling value. As there is no check in this part of the code to see if the car is manual or auto the only way to avoid doing the Torque Reduction Table lookup is to set the value to a near impossible (impractical?) value.

01-28-2006, 12:43 PM	#36
sailorbob Junior Member Join Date: Aug 2005 Posts: 29	Re: New Binary Editor Hmm, don't know why Clint has got Idle Spark Multiplier at 0x7448, he's also got Spark Retard For Knock Sensor there too. Please bear in mind it's easy to make a mistake in these xdf's, there's a lot of stuff in there! I'm always grateful when someone points these things out. I think you've sorted out the offset and different bin file size problem, I've posted a reply on the TunerPro forum in more detail on your query. The value of 255 is, as you say, a disabling value. As there is no check in this part of the code to see if the car is manual or auto the only way to avoid doing the Torque Reduction Table lookup is to set the value to a near impossible (impractical?) value.