[SlowJoe]

Error Wrong Vehicle:
If you are attempting to program a vehicle, and you receive the error: "Wrong Vehicle".
This means that the VIN stored on the tuner does not match the VIN of the vehicle.
Solutions:

* Scroll down to Device Info, Press Select twice. It will display Tuner Status.

NOTE: If it does not take you to the Tuner Status Window, and instead kicks you back to the Device Info Screen, Your Firmware is Old and will Need to be Updated to check the status. There is an FAQ section for this.
*Status will either be: Stat=Stock, Stat=Aftermarket, or Stat=Unused.*

* Stat=Stock - Your tuner is half locked, but fixable. Go the the tech support page, select the Ford Xcalibrator 2 in the first drop down, select Device Update Software in the second drop down and hit Search. Download Liveload 3 by clicking the "Click Here to Download" next to it. Install this application, once installed open it up, plug in the X2. The program asks the X2 to be on the main menu. Program Vehicle is the main menu of the X2s. Press the unlock button within the liveload application. This will change the status to Unused and the tuner will then be ready to tune a new vehicle.


* If Stat=Aftermarket - The vehicle is VIN locked, you need to either return the vehicle it is currently locked to back to stock, or you will need to call Tech Support and Get a Return Authorization and pay an Unlocking Fee.


* If Stat=Unused - You will not receive this error message.