StreetStangs.net - View Single Post - New Moates hardware almost ready for primetime....

Dale McPeters · 07-09-2010, 04:45 PM

Yep for the J3 module chips you will need the chip burner and the adapter board that goes in between. The J3 modules run about $60 ea. You can use the QH to datalog and get then tune right and then burn the binary to a chip.

EEC-Analyzer will be used to run the datalogs through and it will make changes that you can save and write back to the QH.

07-09-2010, 04:45 PM	#51
Dale McPeters 5.0 Block/Walnut Cracker Join Date: May 2005 Location: Working.... Posts: 2,409	Yep for the J3 module chips you will need the chip burner and the adapter board that goes in between. The J3 modules run about $60 ea. You can use the QH to datalog and get then tune right and then burn the binary to a chip. EEC-Analyzer will be used to run the datalogs through and it will make changes that you can save and write back to the QH. __________________ '14 Dodge Challenger SRT8 392 6-speed