View Single Post
Old 03-20-2011, 02:06 PM   #1
Dale McPeters
5.0 Block/Walnut Cracker
 
Dale McPeters's Avatar
 
Join Date: May 2005
Location: Working....
Posts: 2,409
1988 T-Top GT aka Project Black Trash

Project has been sold all parts sold as well
Well since we are waiting on parts for the SRT8 Challenger it is time to finish up the '88 T-Top car aka project black trash...

Project plans are as follows >

1. New fuel tank assembly (sending unit etc.)
2. 255 LPH hp pump w/pump basket.
3. New thermostat & housing.
4. New front accessory pulleys (existing ones are too small)
5. New Aluminum tig welded Radiator (existing one has developed a leak)
6. New Fan, Fan Clutch & Fan Shroud
7. Upgraded TR-3550 trans that came out of the '91
8. Existing 347 short block that is on the engine stand with 30lb/hr injectors
9. AFR-185 heads with Anderson springs
10. Anderson B-451 cam
11. TFS-R upper & lower intake w/ TB
12. SFI-Billet Flywheel & dampner
13. Replace rear upper & lower control arms
14. Cobra R rims and tires (still sitting in the shop)
15. New headliner and weather stripping (will be one of the last things I do after paint is finished)
16. Moates QH or AEM EMS (haven't decided which one to pull off the shelf and use yet)
17. Spec stage 2+ clutch (will have to order from coupe)
18. Long tube headers & h-pipe along with cat back
19. Replace front windshield

All items are sitting in the shop waiting to be installed except for the clutch, headliner and weather stripping. Will add additional items as I have time..still can't figure out what to do with the brand new blower that is still sitting in the box from Vortech.....

The car is on the lift waiting for me to have time off work to get started...lol

Will add pictures as time permits.
__________________
'14 Dodge Challenger SRT8 392 6-speed

Last edited by Dale McPeters; 01-07-2014 at 05:42 PM.
Dale McPeters is offline   Reply With Quote