Re: 96-98 cobra cam options.
FRPP Cams
99/01 Cobra's use the same Intake and Exhaust Cams
98+ Navigators use the same Intake and Exhause Cams
03 4V's (Cobra, Mach1, Marauder, Aviator) use the Navigator Intake Cam and 99/01 Cobra Exhaust Cam
I'm not sure about the cam specs for the 96-98 Cobra's because I don't have a pair to measure and no one will loan me a set. But I am willing to bet with the B-heads that you will not gain much by going with the 03 4V setup because of the swirlport/intake design.
This, of course, is pure speculation which nobody has been able to answer for me at all. I would check your cam timing if you pull the covers because our motors can be off up to 10* from the factory!
My vote is for something like a Crower cam.
__________________
I heard it on the internet, so it must be true.
"I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent
"An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein
"Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown
|