StreetStangs.net - View Single Post - Analyze my Datalog. . .tell me what's causing this

86GT · 04-26-2005, 10:18 AM

I just replaced my ECT too. Do not buy the cheap plastic one. They tend to go bad after a year. I have gone through two of them already. I now have the original Borg Warner version.

Another food for thought, If the EEC power relay was on the fritz then it could cause what you are seeing. Since you are monitoring the EEC while this is happening, the EEC loses power, but the Tweecer plugged into the laptop is supplying the minimum voltage. The PC will not be able to supply the full current and things begin to drop off.

04-26-2005, 10:18 AM	#15
86GT Member Join Date: Mar 2005 Location: Sacramento California Posts: 449	Re: Analyze my Datalog. . .tell me what's causing this I just replaced my ECT too. Do not buy the cheap plastic one. They tend to go bad after a year. I have gone through two of them already. I now have the original Borg Warner version. Another food for thought, If the EEC power relay was on the fritz then it could cause what you are seeing. Since you are monitoring the EEC while this is happening, the EEC loses power, but the Tweecer plugged into the laptop is supplying the minimum voltage. The PC will not be able to supply the full current and things begin to drop off. __________________ EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more.