|
Lean on Tip in
Ok.. I have been following the Accel global multi thread... I have noticed that my car is having a lean condition when I accel from a coasting condition or very light throttle (load). It is causing it to stumble slightly and about to drive me crazy... I can give it alittle more throttle and able to overcome the lean issue but want to get the stumble gone. I have raised my Accel global multi to 1 but still have the issue. I have noticed that the commanded is showing about 13 or so A/F and my WB is showing about 16 - 18 a/f. I have made an adjustment to the MAF using the EA which did add alittle fuel at the area that the MAF was at when this happened. I will verify this tomorrow to determine if it will work. Am I on the right track or am I heading down a wrong path?
I have not played with my MAF curve in several months... so this could be the problem. your thoughts?
__________________
306 (stock block),TFS Track Heat Heads, E303 Cam, TFS track heat intake, 70 mm TB, 75mm Pro-M,42 lb injectors,Aeromotive AFPR, 255 lph intank, Crane Hi-6/LX-92. Turbonetics 60-1 hi-fi
Best ET: 11.88 @ 117mph
427 HP/ 480 ftlb TQ
|