|
10-25-2005, 05:31 PM | #1 |
Senior Member
Join Date: Sep 2005
Location: Tampa, Florida
Posts: 157
|
can a stock '99 GT bloack handle this?
i'm thinking that it will be pushing what the engine can handle with a stock block, what do you think
intercooled 8PSI centrif. supercharger 75HP or if possible 125HP shot of NOS i'm leaning towards it being pretty risky |
10-25-2005, 06:15 PM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: can a stock '99 GT bloack handle this?
Somebody told me that low 400's at the wheels is all you want to do in a stock shortblock
|
10-25-2005, 08:43 PM | #3 |
Mine's bigger...
|
Re: can a stock '99 GT bloack handle this?
I think it will. They can handle 10-12 psi with an aftercooler, and I dont think this is much different. They both cool the intake charge which prevents detonation. Its all in the tune But why?
__________________
323rwhp | 320rwtq - 4VNA 12.13 @ 113.36 | 1.63 60' |
10-25-2005, 09:14 PM | #4 |
Senior Member
Join Date: Sep 2005
Location: Tampa, Florida
Posts: 157
|
Re: can a stock '99 GT bloack handle this?
well i dont want the continuose stress on the motor like have 12 PSI but i would like a bit more power than the 8psi but i would only use it once in a while so a shot of nos would be good for this
|
10-26-2005, 07:00 PM | #5 |
Friends
|
Re: can a stock '99 GT bloack handle this?
400-425 is what I would consider the safe daily driver power level for most 2V blocks. You could do more for a dyno queen and occasional 1/4 mile car.
__________________
2001 Cobra 'Vert Procharged and Intercooled 455rwhp/441rwtq Work Car: 2005 Honda Odyssey 400 whp Turbo V6, 6-speed, full cage, H&R Suspension, Brembo Brakes |
10-26-2005, 07:33 PM | #6 | |
LE equipment inventor....
Join Date: Dec 2004
Location: Jasper,AL
Posts: 1,751
|
Re: can a stock '99 GT bloack handle this?
Quote:
|
|
10-26-2005, 07:44 PM | #7 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: can a stock '99 GT bloack handle this?
Quote:
|
|
10-26-2005, 08:04 PM | #8 | |
ooooo cake!!!
Join Date: Dec 2004
Location: Saks, AL
Posts: 1,630
|
Re: can a stock '99 GT bloack handle this?
Quote:
I do believe the pistons and rods are the same but the 2v crank is cast and the 4v crank is forged. |
|
10-26-2005, 09:23 PM | #9 | |
Mine's bigger...
|
Re: can a stock '99 GT bloack handle this?
Quote:
__________________
323rwhp | 320rwtq - 4VNA 12.13 @ 113.36 | 1.63 60' |
|
10-26-2005, 08:22 PM | #10 |
Friends
Join Date: Mar 2005
Location: McCalla
Posts: 1,241
|
Re: can a stock '99 GT bloack handle this?
Kenne Belle and NX both go by a maximum of 450hp on a stock shortblock. Much more than that and you'll be picking up pieces of your motor off of the ground.
|
|
|