03-30-2005, 08:59 PM | #1 |
Super Moderator
Join Date: Dec 2004
Location: on the water
Posts: 1,280
|
Want better 60's
This is the current set up I am running as of right now....
Eibach Drag Springs w/ RR airbag at 15psi Lakewood 70/30 struts up front No front Sway Bar Lakewood 50/50 rear shock No Rear sway bar This set up has improved my 60's .2's both N/A and on the N2O. My previous set up was.... Eibach Lowering springs and stock shocks and sruts. Just thought I would post this for those that dont like their 60's with a lowering suspension. Future suspension mods are a Tubular K-member and Rear Anti-roll Bar and Battle Boxes.
__________________
2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles |
04-01-2005, 09:45 PM | #2 |
Mine's bigger...
|
Re: Want better 60's
What control arms do you have?
you're running slikcs, right? Get those TQ boxes welded up asap
__________________
323rwhp | 320rwtq - 4VNA 12.13 @ 113.36 | 1.63 60' |
04-02-2005, 09:39 PM | #3 |
Super Moderator
Join Date: Dec 2004
Location: on the water
Posts: 1,280
|
Re: Want better 60's
I am running UPR upper and lower control arms, as for the torque boxes, mine look just the same as they did when she rolled of the assembly line except for some light rusted areas. My theory on the torque box issue is that if you run an aftermarket lower and stock upper then you will have problems due to the different flex geometry in the two parts.
I have either run completely stock setup back there or totally aftermarket and I ahve had not one problem. There are 3 people that I know that have aftermarket lowers and stock uppers and all three of them have had to weld up their torque boxes. I have been running this way for over 5 years with either drag radials or slicks.
__________________
2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles |
04-03-2005, 10:41 AM | #4 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: Want better 60's
Quote:
That is the exact reason why I suggest people to always buy both uppers and lowers at one time, or none at all.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
05-09-2005, 06:24 PM | #5 | |
Senior Member
Join Date: Mar 2005
Location: Cincinnati, OH
Posts: 149
|
Re: Want better 60's
Quote:
|
|
05-09-2005, 06:44 PM | #6 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: Want better 60's
I think you should get uppers at the same time.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
05-09-2005, 06:45 PM | #7 | |
Administrator
Join Date: Dec 2004
Location: Huntsville, AL
Posts: 14,774
|
Re: Want better 60's
Quote:
__________________
1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI |
|
05-09-2005, 07:20 PM | #8 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: Want better 60's
Quote:
You really need to do both upper and lower control arms at the same time and also be sure to use similar type bushings for both.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
05-09-2005, 07:37 PM | #9 | |
Senior Member
Join Date: Mar 2005
Location: Cincinnati, OH
Posts: 149
|
Re: Want better 60's
Quote:
|
|
05-09-2005, 07:46 PM | #10 | |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
Re: Want better 60's
Quote:
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
|
|
|