StreetStangs.net  

Go Back   StreetStangs.net > Technical > EEC Management

Reply
 
Thread Tools Display Modes
Old 04-07-2010, 09:22 PM   #1
DerekT
Yellow 95 GT
 
Join Date: Apr 2010
Location: Arab, AL
Posts: 11
Just purchased quaterhorse and binary editor

Well i recently purchased the Quaterhorse,and the Binary Editor for my 95 GT,so i was just going to see who all on here is or has ran this and get some tips on the does and dont's of tunning my car.I've been doing some research and it seems that one of the biggest reccomendations is to read up as much as possible on it,but i thought i'd just ask around for some helpfull hints on it,this is the first time i've ever messed with anything like this so any and all help is greatly appreciatted.As of now my car is basically stock, but the reason i went ahead and purchased it and installed it was i wanted to get my feet wet with it before i put my aluminum headed 302 in the car.The new motor is a 302 with a set of worked TF TW heads, with an E cam and a 95 Cobra intake, with long tubes an Xpipe and magnaflow mufflers.So if there's anyone that has any experience with this any and all help with it would be appreciatted.
Thanks.
Derek.
__________________
All i am is all i can be,never worthy,but forgiven.DH
DerekT is offline   Reply With Quote
Old 04-07-2010, 09:26 PM   #2
SlowJoe
Mind Blowing
 
SlowJoe's Avatar
 
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
there is some guys here that will maybe help you get your feet wet. welcome to the board.
__________________
Slow Joe Racing
2008 dodge ram 5.7 HEMI
1993 lx with a 289 and a 3 speed on the floor
WTB 1955 t-bird project
SlowJoe is offline   Reply With Quote
Old 04-07-2010, 09:28 PM   #3
SlowJoe
Mind Blowing
 
SlowJoe's Avatar
 
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
this is something to help a little.

http://www.streetstangs.net/showthread.php?t=13385
__________________
Slow Joe Racing
2008 dodge ram 5.7 HEMI
1993 lx with a 289 and a 3 speed on the floor
WTB 1955 t-bird project
SlowJoe is offline   Reply With Quote
Old 04-07-2010, 09:29 PM   #4
DerekT
Yellow 95 GT
 
Join Date: Apr 2010
Location: Arab, AL
Posts: 11
Just purchased Quaterhorse

Sounds good, oh and thanks for sending me to this site Joecoupe, i really have enjoyed it, and thanks for the kind welcome.
__________________
All i am is all i can be,never worthy,but forgiven.DH
DerekT is offline   Reply With Quote
Old 04-07-2010, 09:43 PM   #5
coupe
Super Moderator
 
coupe's Avatar
 
Join Date: Dec 2004
Posts: 6,313
Dale McPeters will probably respond soon... he has done a good bit of work with the Quarterhorse along with some other Moates products and AEM stand-alones.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein
coupe is offline   Reply With Quote
Old 04-07-2010, 09:48 PM   #6
DerekT
Yellow 95 GT
 
Join Date: Apr 2010
Location: Arab, AL
Posts: 11
Sounds great, i hope he does because i can definetely use all the help and guidance i can get.
__________________
All i am is all i can be,never worthy,but forgiven.DH
DerekT is offline   Reply With Quote
Old 04-08-2010, 03:25 AM   #7
SvoBrown
Senior Member
 
SvoBrown's Avatar
 
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
I have some of the moates stuff. J3 chip in the svo. after I got someone to get the tune done it has been flawless ever since. Good stuff!!
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne
SvoBrown is offline   Reply With Quote
Old 04-08-2010, 05:07 AM   #8
93cobra1928
Dazed and Confused
 
93cobra1928's Avatar
 
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
eectuning.org is a good place to get info, lots of good tuning
tech there
__________________
Proud owner of 93 Cobra #1928
306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards
93cobra1928 is offline   Reply With Quote
Old 04-08-2010, 10:43 AM   #9
DerekT
Yellow 95 GT
 
Join Date: Apr 2010
Location: Arab, AL
Posts: 11
Svobrown who did you get to tune your car, and yes EECTunning.org is a good website.
__________________
All i am is all i can be,never worthy,but forgiven.DH
DerekT is offline   Reply With Quote
Old 04-08-2010, 11:29 AM   #10
Dale McPeters
5.0 Block/Walnut Cracker
 
Dale McPeters's Avatar
 
Join Date: May 2005
Location: Working....
Posts: 2,409
The main things to get correct on the '95 cars is the maf & injectors.
If you don't then all of you load calculations will be off...

Meaning that the fuel & spark are based on the actual load calculations

What all are you needing help with?
__________________
'14 Dodge Challenger SRT8 392 6-speed
Dale McPeters is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:49 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.