Next round of MODS for the 03L.............

EZ SPEED · 04-28-2005, 12:22 PM

Here is my next round of mods:

Crower stage 2 cams, Crower titanium retainers, Crower springs, and Walbro dual 255 pumps

This should finish the 03L engine mods for a while. I think the only thing I dont have is ported heads.

I still need to work on my tune, but I postponed the tune until I install these parts.

The only bad news is that I have a lot of installs to do on other peoples cars and trucks ...which means that mine will have to wait for at least a month, maybe 2 months

, but thats okay....I have waited this long.

Italian LX · 04-28-2005, 12:25 PM

Sweet!

EZ SPEED · 04-28-2005, 01:21 PM

Here is a list of my Mods for those who might not know.

Crower stage 2 Cams** waiting install
Walbro dual 255 pumps**waiting install
Built Shortblock
Kenne Bell Supercharger
KB pulleys (3.5, 3.25, 3.00, 2.75, 2.50)
Metco 6lb. lower
60# injectors
SCT MAF
SCT Pro Racer Tuning Software
Raptor Datalogger
AEM Wideband
Metco idler assy.
Accufab Single Blade Throttle Body
C&L Trueflow Inlet Pipe with Custom 95mm MAF Tube
Denso Iridium IT22 plugs (or NGK BR7EFâ€™s)
Dynatech Longtube Headers and High flow converters
Bassani Cat-back Exhaust
Elec. Fan
Cobra waterpump
170 degree Thermostat
EGR Delete
Factory Tech trans valve body
FT 2600 Stall
Strange Engineering 10-way adjustable rear shocks
JLP 54" Traction Bars
JLP Driveshaft loop
Linelock
M&H Racemaster Cheater Slicks size 30x14x16

Shorty · 04-28-2005, 01:51 PM

i cant wait to see what it will do.

mustang1549 · 04-28-2005, 02:52 PM

do you plan on racing it still or just as a show truck?

Scothew · 04-28-2005, 03:07 PM

Eric, those cams look massive! Are there any other L's out with similar mods to what you will have? Im curious as to a rough estimate number you are looking for.

QWKSNKE · 04-28-2005, 03:35 PM

Quote:

Originally Posted by Scothew

Eric, those cams look massive! Are there any other L's out with similar mods to what you will have? Im curious as to a rough estimate number you are looking for.

he is hoping to break 325 rwhp.

99LS1 · 04-28-2005, 03:47 PM

Scothew · 04-28-2005, 03:53 PM

Quote:

Originally Posted by QWKSNKE

he is hoping to break 325 rwhp.

plus or minus 300 right?

TheJeanyus · 04-28-2005, 04:18 PM

Quote:

Originally Posted by QWKSNKE

he is hoping to break 325 rwhp.

With the belt taken off the KB?

04-28-2005, 12:22 PM	#1
EZ SPEED Friends Join Date: Dec 2004 Location: Tempe Arizona Posts: 3,029	Next round of MODS for the 03L............. Here is my next round of mods: Crower stage 2 cams, Crower titanium retainers, Crower springs, and Walbro dual 255 pumps This should finish the 03L engine mods for a while. I think the only thing I dont have is ported heads. I still need to work on my tune, but I postponed the tune until I install these parts. The only bad news is that I have a lot of installs to do on other peoples cars and trucks ...which means that mine will have to wait for at least a month, maybe 2 months , but thats okay....I have waited this long. __________________ 2020 Range Rover Sport HSE P525 Dynamic - Firenze Red - Supercharged 5.0 - 518 HP SOLD - 2010 Camaro SS [/B] - Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/

04-28-2005, 12:25 PM	#2
Italian LX Daddy x4 ...we're done Join Date: Dec 2004 Location: Oxford, AL Posts: 11,551	Re: Next round of MODS for the 03L............. Sweet! __________________ -Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring

04-28-2005, 01:21 PM	#3
EZ SPEED Friends Join Date: Dec 2004 Location: Tempe Arizona Posts: 3,029	Re: Next round of MODS for the 03L............. Here is a list of my Mods for those who might not know. Crower stage 2 Cams waiting install Walbro dual 255 pumpswaiting install Built Shortblock Kenne Bell Supercharger KB pulleys (3.5, 3.25, 3.00, 2.75, 2.50) Metco 6lb. lower 60# injectors SCT MAF SCT Pro Racer Tuning Software Raptor Datalogger AEM Wideband Metco idler assy. Accufab Single Blade Throttle Body C&L Trueflow Inlet Pipe with Custom 95mm MAF Tube Denso Iridium IT22 plugs (or NGK BR7EFâ€™s) Dynatech Longtube Headers and High flow converters Bassani Cat-back Exhaust Elec. Fan Cobra waterpump 170 degree Thermostat EGR Delete Factory Tech trans valve body FT 2600 Stall Strange Engineering 10-way adjustable rear shocks JLP 54" Traction Bars JLP Driveshaft loop Linelock M&H Racemaster Cheater Slicks size 30x14x16 __________________ 2020 Range Rover Sport HSE P525 Dynamic - Firenze Red - Supercharged 5.0 - 518 HP SOLD - 2010 Camaro SS [/B] - Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/

04-28-2005, 01:51 PM	#4
Shorty Pr0j3ct P1mp T1t3, y0! Join Date: Dec 2004 Location: Somewhere wondering why Crimson stole my avatar Posts: 2,022	Re: Next round of MODS for the 03L............. i cant wait to see what it will do. __________________ 93 GT----225rwhp/287rwtq--------1/4 mile= (but getting better)

04-28-2005, 02:52 PM	#5
mustang1549 Friends Join Date: Jan 2005 Location: FOB Sharana, Afghanistan Posts: 1,601	Re: Next round of MODS for the 03L............. do you plan on racing it still or just as a show truck?

04-28-2005, 03:07 PM	#6
Scothew Censored Jihad Join Date: Dec 2004 Location: B'ham, AL Posts: 4,108	Re: Next round of MODS for the 03L............. Eric, those cams look massive! Are there any other L's out with similar mods to what you will have? Im curious as to a rough estimate number you are looking for. __________________ Theres only one way to get to Carnegie Hall..... .... Practice.

04-28-2005, 03:47 PM	#8
99LS1 WWIP Saving for Evo XXI Join Date: Dec 2004 Location: You like my biodata. B-i-o-d-a-t-a! Posts: 1,693	Re: Next round of MODS for the 03L............. __________________ 08 cbr 1000 73 mach 1