JLP Power Flow Upper Plenum

EZ SPEED · 01-09-2005, 05:01 AM

I got my new JLP Power Flow Plenum a couple of days ago and finally got around to start installing this awesome piece.

The JLP PF is a work of art. I love the race inspired look of a sheetmetal intake and along with the polishing to give it the ultimate bling.
Some of you might notice that I also added a Metco Idler setup a few days ago which works great.

Here is a pic of the KB and the stock upper that has been polished. All the polishing work still looks pretty good considering its been exactly a year and 7200 miles since it has been polished.

Here is another pic showing the rear of the stock upper with the "restrictor plate" to adapt the larger KB opening to the smaller factory opening.

Here is my favorite pic......showing the difference in the JLP intake along side of the stock upper. As you can see there is a HUGE opening on the JLP to take full advantage of the KB inlet. Bye Bye "restrictor plate" !!

And here are a couple of pics of the JLP along with the blower which is getting some more polishing work done.
I couldnt wait to see how it would look together so I just loosly assembled the pieces to get an idea. I should hopefully have the polishing work finished on the blower in a few days and get it all fully assembled. But I knew ya'll would want to see a sneak preview.

So far since Thanksgiving I have added:
Dynatech Longtube Headers and High Flow Cats with Mid-pipes
Custom Intake tube with billet 95mm MAF and 6" inlet filter
Metco Idler assembly
JLP Power Flow Plenum

I still need a couple of more pieces to finish this round of modifications before I get the tune straightend out.
Be looking for new dyno numbers around late Feburary.

Italian LX · 01-09-2005, 06:43 AM

That looks sweet, Eric.

QWKSNKE · 01-09-2005, 06:55 AM

Jesus. That opening is huge on the JLP compared to OEM.

tacbear · 01-09-2005, 08:00 AM

Hey that stock upper sure would look good on Marsha's truck!!!!

Craig K. · 01-09-2005, 08:19 AM

Wow talk about a difference in openings!

I like all the polished AL too!

EZ SPEED · 01-09-2005, 09:12 AM

Quote:

Originally Posted by tacbear

Hey that stock upper sure would look good on Marsha's truck!!!!

It can be hers/ yours for $200.....I am also selling the JLP intake box for $125 or buy them both for $300

Shorty · 01-09-2005, 10:15 AM

whats a KB?

Shorty · 01-09-2005, 10:17 AM

seriously that looks great man. the difference in the inlet openings is unreal. that thing should breathe a little deeper now. although you dont see them much i really like the sheetmetal intakes.

QWKSNKE · 01-09-2005, 11:50 AM

Quote:

Originally Posted by Shorty

whats a KB?

That thing you want on your car

ChipR4cam · 01-09-2005, 12:45 PM

That looks really good, Eric.

01-09-2005, 05:01 AM	#1
EZ SPEED Friends Join Date: Dec 2004 Location: Tempe Arizona Posts: 3,029	JLP Power Flow Upper Plenum I got my new JLP Power Flow Plenum a couple of days ago and finally got around to start installing this awesome piece. The JLP PF is a work of art. I love the race inspired look of a sheetmetal intake and along with the polishing to give it the ultimate bling. Some of you might notice that I also added a Metco Idler setup a few days ago which works great. Here is a pic of the KB and the stock upper that has been polished. All the polishing work still looks pretty good considering its been exactly a year and 7200 miles since it has been polished. Here is another pic showing the rear of the stock upper with the "restrictor plate" to adapt the larger KB opening to the smaller factory opening. Here is my favorite pic......showing the difference in the JLP intake along side of the stock upper. As you can see there is a HUGE opening on the JLP to take full advantage of the KB inlet. Bye Bye "restrictor plate" !! And here are a couple of pics of the JLP along with the blower which is getting some more polishing work done. I couldnt wait to see how it would look together so I just loosly assembled the pieces to get an idea. I should hopefully have the polishing work finished on the blower in a few days and get it all fully assembled. But I knew ya'll would want to see a sneak preview. So far since Thanksgiving I have added: Dynatech Longtube Headers and High Flow Cats with Mid-pipes Custom Intake tube with billet 95mm MAF and 6" inlet filter Metco Idler assembly JLP Power Flow Plenum I still need a couple of more pieces to finish this round of modifications before I get the tune straightend out. Be looking for new dyno numbers around late Feburary.

01-09-2005, 06:43 AM	#2
Italian LX Daddy x4 ...we're done Join Date: Dec 2004 Location: Oxford, AL Posts: 11,551	Re: JLP Power Flow Upper Plenum That looks sweet, Eric. __________________ -Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring

01-09-2005, 06:55 AM	#3
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: JLP Power Flow Upper Plenum Jesus. That opening is huge on the JLP compared to OEM. __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

01-09-2005, 08:00 AM	#4
tacbear LE equipment inventor.... Join Date: Dec 2004 Location: Jasper,AL Posts: 1,751	Re: JLP Power Flow Upper Plenum Hey that stock upper sure would look good on Marsha's truck!!!!

01-09-2005, 08:19 AM	#5
Craig K. Nothing new here Join Date: Dec 2004 Location: Senoia, GA Posts: 2,990	Re: JLP Power Flow Upper Plenum Wow talk about a difference in openings! I like all the polished AL too!

01-09-2005, 10:15 AM	#7
Shorty Pr0j3ct P1mp T1t3, y0! Join Date: Dec 2004 Location: Somewhere wondering why Crimson stole my avatar Posts: 2,022	Re: JLP Power Flow Upper Plenum whats a KB? __________________ 93 GT----225rwhp/287rwtq--------1/4 mile= (but getting better)

01-09-2005, 10:17 AM	#8
Shorty Pr0j3ct P1mp T1t3, y0! Join Date: Dec 2004 Location: Somewhere wondering why Crimson stole my avatar Posts: 2,022	Re: JLP Power Flow Upper Plenum seriously that looks great man. the difference in the inlet openings is unreal. that thing should breathe a little deeper now. although you dont see them much i really like the sheetmetal intakes. __________________ 93 GT----225rwhp/287rwtq--------1/4 mile= (but getting better)

01-09-2005, 12:45 PM	#10
ChipR4cam You can call me mister. Join Date: Jan 2005 Location: Plenty recovered. Posts: 3,518	Re: JLP Power Flow Upper Plenum That looks really good, Eric.