|
09-07-2013, 05:34 PM | #1 |
Senior Member
Join Date: Nov 2006
Posts: 488
|
picked up some go parts...
Well i ran up on some vic jr heads, carb intake, e cam and polished tall ford valve covers...so i had to get it lol...since i already have a 10sec 331 sitting in the garage floor i figured i would go with a big windsor stroker...just dont know which one..Any suggestions???
__________________
Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!! |
09-07-2013, 07:24 PM | #2 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
393 unless you want to buy a block
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
09-07-2013, 07:30 PM | #3 |
Senior Member
Join Date: Nov 2006
Posts: 488
|
i was leaning towards the 393..i know im not gonna go with the e cam too small for what i want...probably the anderson n91 or a comp custom grind..
__________________
Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!! |
09-07-2013, 07:54 PM | #4 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
393 with vics and custom grind would be lots of fun!
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
09-07-2013, 08:11 PM | #5 |
Senior Member
Join Date: Nov 2006
Posts: 488
|
i hope so...lol i have nitrous kits if its not "fun enough"...D.S.S has their 393 pro bullet short blocks for 2999.00 so might just go that route i had great service and still do out of my 331 i got from them.
__________________
Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!! |
09-08-2013, 02:23 PM | #6 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
393 and vics would work great on a little spray.
My ported hi ports are a little much for my 3.85 stroked windsor so I guess it will always be a titty Custom grind cams seem to work wonders when done correctly.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 09-08-2013 at 02:30 PM. |
09-09-2013, 07:33 AM | #7 |
Senior Member
Join Date: Nov 2006
Posts: 488
|
I guess you never really know what a motor will do until you actually get it together lol
__________________
Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!! |
|
|