09-18-2008, 08:56 PM | #21 |
Member
Join Date: Sep 2008
Posts: 43
|
yeah it has a wastegate. And im going to put a spring on the wastegate shaft. That will counter the spring in the diaphram. If that doesnt work ill go with the stock t3 unit. Does anyone know the deminsions of the stinger fmic. They are kinda high priced i think.
|
09-18-2008, 09:07 PM | #22 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
here are a few pics of my hx35 and hy35. i like the hy 35 because the outlet faced forward. and it spooled a lot fast. but it took a dump. what kind of manifold you going to use?
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
09-19-2008, 09:35 PM | #23 |
Member
Join Date: Sep 2008
Posts: 43
|
im using the stock E6 for now. I would like to find a header and go with an external wastegate.
|
09-19-2008, 09:52 PM | #24 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Build your own IC. It is much more fun.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne |
09-20-2008, 04:47 AM | #25 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
if think you are going to stay with the holset turbo. i would save my money and get with 40bob and have him build you a center mount for that turbo.
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
09-20-2008, 12:36 PM | #26 |
Member
Join Date: Sep 2008
Posts: 43
|
i dont know anyone who can weld aluminum, so my own ic is hard to do. I have been looking at the NPR intercoolers. I worked on one at work a few days ago and saw the ic. I was like thats it right there. They are kind of hard to find though
|
09-20-2008, 04:52 PM | #27 |
Member
Join Date: Sep 2008
Posts: 43
|
What about the ebay ic's. Has anyone had experiance with them. I know some ebay stuff is horrible, like a lot of the turbos. One of my friends found out the hard way.
|
09-20-2008, 07:16 PM | #28 | ||
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
Quote:
I'll see if I can get the dimensions tomorrow off the one I installed in my car last weekend
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
||
09-21-2008, 08:55 AM | #29 |
Senior Member
Join Date: Nov 2005
Location: Graham AL
Posts: 1,461
|
Hey Lee, Send me your address so I can find your house next weekend. I want to see the progress. I know of 2 stinger front mounts on svo's and both of them love it.
The kit is a nice way to go if you can afford it. I got lucky on mine and was able to weld it at a friends house. It was under $200 in all. http://picasaweb.google.com/svobrown/Intercooler# The red one is Mike Flemings of CA. Nice setup and pushing over 300.I think he has an air duct going to it with a fan setup now. The lower one is mine.
__________________
''Life's tough... it's even tougher if you're stupid.'' - - John Wayne Last edited by SvoBrown; 09-21-2008 at 08:58 AM. |
09-21-2008, 02:23 PM | #30 |
Member
Join Date: Sep 2008
Posts: 43
|
what intercooler is that SVobrown? that isnt the intercooler pictured on stingers website. Or is it not a stinger setup? It looks good whatever it is, very big!!!!!
|
|
|