5.4 freak of nature... - Page 14

rtusnake · 05-19-2009, 11:39 PM

Doing my fuel system the same as yours I believe. Looks like your feeding a y block to the rear of the rails, from the front of the rails to each side of the regulator? What type of regulator is that?

myillwillinc · 05-20-2009, 12:51 AM

aeromotive 13109

coupe · 05-20-2009, 02:42 PM

I've had good luck out of aeromotive regulators on customer's cars...and they look pretty good too. How far out is your project from running and getting tuned Tommy?

myillwillinc · 05-20-2009, 02:57 PM

ftp is making some nice stainless long tubes for it and no limit is making my intercooler pipes. then it's just assembly and tuning.

coupe · 05-20-2009, 03:58 PM

Quote:

Originally Posted by myillwillinc

ftp is making some nice stainless long tubes for it

longtubes for turbos??

coupe · 05-20-2009, 03:58 PM

Whoops. Forgot...you're mounting them somewhere under/behind the car.

myillwillinc · 07-07-2009, 01:47 PM

updated engine pic:

progress on headers:

waypastcrazy · 07-07-2009, 06:45 PM

Nice. Should be bad ride when ya get everthing together.

Dale McPeters · 07-16-2009, 06:31 PM

Quote:

Originally Posted by myillwillinc

updated engine pic:

progress on headers:

Larger pictures please.

(my old eyes are really getting bad)

myillwillinc · 07-16-2009, 10:24 PM

better?

05-19-2009, 11:39 PM	#131
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	Doing my fuel system the same as yours I believe. Looks like your feeding a y block to the rear of the rails, from the front of the rails to each side of the regulator? What type of regulator is that? __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")

05-20-2009, 12:51 AM	#132
myillwillinc Senior Member Join Date: Mar 2005 Posts: 593	aeromotive 13109 __________________ 5.4 project in the works..... link: http://www.illwillinc.com/97mustang.htm PowderCoating and Anodizing: http://www.illwillinc.com/

05-20-2009, 02:42 PM	#133
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	I've had good luck out of aeromotive regulators on customer's cars...and they look pretty good too. How far out is your project from running and getting tuned Tommy? __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

05-20-2009, 02:57 PM	#134
myillwillinc Senior Member Join Date: Mar 2005 Posts: 593	ftp is making some nice stainless long tubes for it and no limit is making my intercooler pipes. then it's just assembly and tuning. __________________ 5.4 project in the works..... link: http://www.illwillinc.com/97mustang.htm PowderCoating and Anodizing: http://www.illwillinc.com/

05-20-2009, 03:58 PM	#136
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	Whoops. Forgot...you're mounting them somewhere under/behind the car. __________________ " If you can't explain it simply, you don't understand it well enough. " - Albert Einstein

07-07-2009, 01:47 PM	#137
myillwillinc Senior Member Join Date: Mar 2005 Posts: 593	updated engine pic: progress on headers: __________________ 5.4 project in the works..... link: http://www.illwillinc.com/97mustang.htm PowderCoating and Anodizing: http://www.illwillinc.com/

07-07-2009, 06:45 PM	#138
waypastcrazy ADDICTED TO SMALL BLOCKS Join Date: Jan 2007 Location: lookout mt Posts: 1,757	Nice. Should be bad ride when ya get everthing together. __________________ http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS

07-16-2009, 10:24 PM	#140
myillwillinc Senior Member Join Date: Mar 2005 Posts: 593	better? __________________ 5.4 project in the works..... link: http://www.illwillinc.com/97mustang.htm PowderCoating and Anodizing: http://www.illwillinc.com/ Last edited by myillwillinc; 07-16-2009 at 10:28 PM.