help on cylinder head info...

475HP '03 cobra · 11-28-2005, 04:29 PM

ok i'm sorta new to the mod motor world, my knowledge is with pushrod engines and this camshaft in the cylinder head has got me confused.

basically i'm looking at cam upgrades and it says to use PI cylinder heads....did these come on the 2001 models or do you have to buy them after market....basically i want to know if..... these are compatible

look below for specs.

475HP '03 cobra · 11-28-2005, 04:36 PM

ok i had to drop the links becuase summit doesnt know how to link....

475HP '03 cobra · 11-28-2005, 04:38 PM

Brand: Competition Cams
Product Line: Competition Cams Xtreme Energy Camshafts
Cam Style: Hydraulic roller follower
Basic Operating RPM Range: 2,200-6,200 RPM
Intake Duration 050 inch Lift: 242
Exhaust Duration 050 inch Lift: 246
Duration at 050 inch Lift: 242 int./246 exh.
Advertised Intake Duration: 278
Advertised Exhaust Duration: 282
Advertised Duration: 278 int./282 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.550
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.550
Valve Lift with Factory Rocker Arm Ratio: 0.550 int./0.550 exh. lift
Lobe Separation (degrees): 113
Intake Valve Lash (in): 0.000
Exhaust Valve Lash (in): 0.000
Computer Controlled: No
Grind Number: XE278AH-13
Quantity: Sold as a pair.
Notes: For 1999 and later performance improvements heads. Can also be used in 1998 and earlier heads with retainer to guide clearance modifications and Comp Cams valve springs.

Camshafts, Hydraulic Roller Follower, Advertised Duration 278/282, Lift .550/.550, Ford, Modular V8 SOHC, Pair

Check to make sure this part fits your application
Get Xtreme performance from Comp Cams.
Comp Cams Xtreme Energy camshafts are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.

thats the cam specs

475HP '03 cobra · 11-28-2005, 04:38 PM

heres the cylinder head specs....

Brand: Patriot Performance
Product Line: Patriot Performance Ford Stage III SOHC Cylinder Heads
Cylinder Head Style: Assembled
Cylinder Head Material: Aluminum
Cylinder Head Finish: Natural
Combustion Chamber Volume (cc): 46
CNC Machined Combustion Chamber: Yes
Intake Runner Volume (cc): 180
Exhaust Runner Volume (cc): 67
CNC Machined Intake Runner: Yes
CNC Machined Exhaust Runner: Yes
Intake Port Location: Standard
Exhaust Port Location: Standard
Intake Valves Included: Yes
Intake Valve Diameter (in): 1.840
Exhaust Valves Included: Yes
Exhaust Valve Diameter (in): 1.452
Valve Springs Included: Yes
Damper Spring Included: No
Number of Springs Per Valve: Single
Retainers Included: Yes
Retainer Material: Titanium
Locks Included: Yes
Lock Style: 10 degree
Valve Stem Seals Included: Yes
Valve Stem Seal Style: PC seal
Rocker Arm Studs Included: No
Rocker Arms Included: No
Rocker Arm Nuts Included: No
Guideplates Included: No
Accessory Bolt Holes Drilled: Yes
Valve Guides Included: Yes
Valve Guide Material: Bronze
Valve Seats Machined: Yes
Valve Seat Machine Style: 5-angle
Valve Seat Material: Steel
Steam Holes Drilled: No
Oiling Style: Through head
Machined for O-Ring: No
Heat Crossover: No
Quantity: Sold individually.
Notes: Windsor castings. Requires Performance Improver intake and late style 13-14 bolt valve covers sold separately.

CYLINDER HEAD PAIR

Check to make sure this part fits your application
Add extra rear-wheel horsepower.
These Ford Stage III SOHC cylinder heads from Patriot Performance are designed to add 35 to 40 rear-wheel horsepower. Ideal for street and strip applications, these CNC-ported heads flow over 215 cfm and can handle blown or nitrous setups.

Features include:

* 1.84 in. intake valves
* 1.452 in. exhaust valves
* Valve springs
* Retainers
* Locks and valve seals

475HP '03 cobra · 11-28-2005, 04:40 PM

i know its alot but the damn page links wouldnt work...

QWKSNKE · 11-28-2005, 04:48 PM

Quote:

Originally Posted by 475HP '03 cobra

ok i'm sorta new to the mod motor world, my knowledge is with pushrod engines and this camshaft in the cylinder head has got me confused.

basically i'm looking at cam upgrades and it says to use PI cylinder heads....did these come on the 2001 models or do you have to buy them after market....basically i want to know if..... these are compatible

look below for specs.

yes. PI heads started in 1999

475HP '03 cobra · 11-28-2005, 05:09 PM

i figured out this combo would work because the cylinder heads can support a .600" lift and the cam i'm looking at has a .550" lift....thanks for that answer Qwksnke that cleared up alot.....now i just have to worry about how much the shop is gonna charge to put this combo together....

The Rock 326 · 11-28-2005, 05:17 PM

Quote:

Originally Posted by 475HP '03 cobra

i figured out this combo would work because the cylinder heads can support a .600" lift and the cam i'm looking at has a .550" lift....thanks for that answer Qwksnke that cleared up alot.....now i just have to worry about how much the shop is gonna charge to put this combo together....

Well I can tell you from experience that you'd better make damn sure that whoever installs the cams knows what the hell they are doing. Personally, I'd spend the money on another mod like a S/C. By the time you get the cams, springs, and pay to have the cams installed, you could pay for well over half the cost of a S/C kit. The gains for a cam install isn't going to be worth the money IMO. It really depends on what you are looking to do tho.

If you do the cams, the comp 270's are prone to PTV. The comp 262's are the safest bet, but yield the least HP.

MPH also offers VT cams, and head packages.

475HP '03 cobra · 11-28-2005, 05:50 PM

i just find a little less hp N/A alot more respectable than a little more blown...personally i feel (i have a good shop) that it will be more reliable the route i'm going...btw the shop i'm near builds 6 sec cars....

QWKSNKE · 11-28-2005, 05:51 PM

Quote:

Originally Posted by 475HP '03 cobra

i figured out this combo would work because the cylinder heads can support a .600" lift and the cam i'm looking at has a .550" lift....thanks for that answer Qwksnke that cleared up alot.....now i just have to worry about how much the shop is gonna charge to put this combo together....

the heads may handle .600 lift but your OEM pistons won't

11-28-2005, 04:29 PM	#1
475HP '03 cobra Senior Member Join Date: Sep 2005 Location: Tampa, Florida Posts: 157	help on cylinder head info... ok i'm sorta new to the mod motor world, my knowledge is with pushrod engines and this camshaft in the cylinder head has got me confused. basically i'm looking at cam upgrades and it says to use PI cylinder heads....did these come on the 2001 models or do you have to buy them after market....basically i want to know if..... these are compatible look below for specs. __________________ bet you aint never seen a Shelby V8 ranger...heres a link which includes the one i had built http://photobucket.com/albums/c233/fordguy383/ some people have said mustangs have destroyed my life, i say they've made it worth living.

11-28-2005, 04:36 PM	#2
475HP '03 cobra Senior Member Join Date: Sep 2005 Location: Tampa, Florida Posts: 157	Re: help on cylinder head info... ok i had to drop the links becuase summit doesnt know how to link.... __________________ bet you aint never seen a Shelby V8 ranger...heres a link which includes the one i had built http://photobucket.com/albums/c233/fordguy383/ some people have said mustangs have destroyed my life, i say they've made it worth living.

11-28-2005, 04:38 PM	#3
475HP '03 cobra Senior Member Join Date: Sep 2005 Location: Tampa, Florida Posts: 157	Re: help on cylinder head info... Brand: Competition Cams Product Line: Competition Cams Xtreme Energy Camshafts Cam Style: Hydraulic roller follower Basic Operating RPM Range: 2,200-6,200 RPM Intake Duration 050 inch Lift: 242 Exhaust Duration 050 inch Lift: 246 Duration at 050 inch Lift: 242 int./246 exh. Advertised Intake Duration: 278 Advertised Exhaust Duration: 282 Advertised Duration: 278 int./282 exh. Intake Valve Lift with Factory Rocker Arm Ratio: 0.550 Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.550 Valve Lift with Factory Rocker Arm Ratio: 0.550 int./0.550 exh. lift Lobe Separation (degrees): 113 Intake Valve Lash (in): 0.000 Exhaust Valve Lash (in): 0.000 Computer Controlled: No Grind Number: XE278AH-13 Quantity: Sold as a pair. Notes: For 1999 and later performance improvements heads. Can also be used in 1998 and earlier heads with retainer to guide clearance modifications and Comp Cams valve springs. Camshafts, Hydraulic Roller Follower, Advertised Duration 278/282, Lift .550/.550, Ford, Modular V8 SOHC, Pair Check to make sure this part fits your application Get Xtreme performance from Comp Cams. Comp Cams Xtreme Energy camshafts are built to take advantage of the latest cam technology, to provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum. thats the cam specs __________________ bet you aint never seen a Shelby V8 ranger...heres a link which includes the one i had built http://photobucket.com/albums/c233/fordguy383/ some people have said mustangs have destroyed my life, i say they've made it worth living.

11-28-2005, 04:38 PM	#4
475HP '03 cobra Senior Member Join Date: Sep 2005 Location: Tampa, Florida Posts: 157	Re: help on cylinder head info... heres the cylinder head specs.... Brand: Patriot Performance Product Line: Patriot Performance Ford Stage III SOHC Cylinder Heads Cylinder Head Style: Assembled Cylinder Head Material: Aluminum Cylinder Head Finish: Natural Combustion Chamber Volume (cc): 46 CNC Machined Combustion Chamber: Yes Intake Runner Volume (cc): 180 Exhaust Runner Volume (cc): 67 CNC Machined Intake Runner: Yes CNC Machined Exhaust Runner: Yes Intake Port Location: Standard Exhaust Port Location: Standard Intake Valves Included: Yes Intake Valve Diameter (in): 1.840 Exhaust Valves Included: Yes Exhaust Valve Diameter (in): 1.452 Valve Springs Included: Yes Damper Spring Included: No Number of Springs Per Valve: Single Retainers Included: Yes Retainer Material: Titanium Locks Included: Yes Lock Style: 10 degree Valve Stem Seals Included: Yes Valve Stem Seal Style: PC seal Rocker Arm Studs Included: No Rocker Arms Included: No Rocker Arm Nuts Included: No Guideplates Included: No Accessory Bolt Holes Drilled: Yes Valve Guides Included: Yes Valve Guide Material: Bronze Valve Seats Machined: Yes Valve Seat Machine Style: 5-angle Valve Seat Material: Steel Steam Holes Drilled: No Oiling Style: Through head Machined for O-Ring: No Heat Crossover: No Quantity: Sold individually. Notes: Windsor castings. Requires Performance Improver intake and late style 13-14 bolt valve covers sold separately. CYLINDER HEAD PAIR Check to make sure this part fits your application Add extra rear-wheel horsepower. These Ford Stage III SOHC cylinder heads from Patriot Performance are designed to add 35 to 40 rear-wheel horsepower. Ideal for street and strip applications, these CNC-ported heads flow over 215 cfm and can handle blown or nitrous setups. Features include: * 1.84 in. intake valves * 1.452 in. exhaust valves * Valve springs * Retainers * Locks and valve seals __________________ bet you aint never seen a Shelby V8 ranger...heres a link which includes the one i had built http://photobucket.com/albums/c233/fordguy383/ some people have said mustangs have destroyed my life, i say they've made it worth living.

11-28-2005, 04:40 PM	#5
475HP '03 cobra Senior Member Join Date: Sep 2005 Location: Tampa, Florida Posts: 157	Re: help on cylinder head info... i know its alot but the damn page links wouldnt work... __________________ bet you aint never seen a Shelby V8 ranger...heres a link which includes the one i had built http://photobucket.com/albums/c233/fordguy383/ some people have said mustangs have destroyed my life, i say they've made it worth living.

11-28-2005, 05:09 PM	#7
475HP '03 cobra Senior Member Join Date: Sep 2005 Location: Tampa, Florida Posts: 157	Re: help on cylinder head info... i figured out this combo would work because the cylinder heads can support a .600" lift and the cam i'm looking at has a .550" lift....thanks for that answer Qwksnke that cleared up alot.....now i just have to worry about how much the shop is gonna charge to put this combo together.... __________________ bet you aint never seen a Shelby V8 ranger...heres a link which includes the one i had built http://photobucket.com/albums/c233/fordguy383/ some people have said mustangs have destroyed my life, i say they've made it worth living.

11-28-2005, 05:50 PM	#9
475HP '03 cobra Senior Member Join Date: Sep 2005 Location: Tampa, Florida Posts: 157	Re: help on cylinder head info... i just find a little less hp N/A alot more respectable than a little more blown...personally i feel (i have a good shop) that it will be more reliable the route i'm going...btw the shop i'm near builds 6 sec cars.... __________________ bet you aint never seen a Shelby V8 ranger...heres a link which includes the one i had built http://photobucket.com/albums/c233/fordguy383/ some people have said mustangs have destroyed my life, i say they've made it worth living.