Darkside's 89 Notch

darkside · 12-12-2009, 04:14 PM

Well, after looking around, I have finally got into another Mustang.

Found this on the other side of town.

Right now, it's just a roller. No engine/Trans

Front clip came with it, just isn't pictured.

Red interior- will be the first thing to go

I also have a few parts that came with it which will be for sale soon.

Well, here are the only pics I have at the moment.

The notches that are cut out of the bumper and up on the firewall were for Turbo related parts, so that will need to be fixed, but it's the only real metal work that the car needs..

Not too bad for 500 bucks, clean clear title, what yall think?

swammi · 12-12-2009, 04:29 PM

looks good best of luck!

darkside · 12-12-2009, 06:26 PM

Thanks. Those parts you have will be part of this project, as soon as i come get em lol

89five0Gt · 12-12-2009, 07:39 PM

nice car, especially for $500

darkside · 12-12-2009, 08:02 PM

I'm not draggin ass on this project, i got a engine and trans lined up to get, and a long list of other stuff.

First thing is the interior, gonna get all that done first. That red interior has to go. I figure i will paint most of it.

Need to figure out what a lot of the wiring is on the floor under the carpet, or where the carpet should be. I know the car is wired for a trunk mount battery, so some of the cables are for that.

Also, i need to figure out which computer I need for the 5 speed set up, if it matters, i think the A9L is the best computer for the fox? need to research that.

Right now, my main focus is getting the front clip back on, and the interior done. I plan to start work on that tomorrow morning.

93cobra1928 · 12-13-2009, 09:18 AM

Nice find

darkside · 12-13-2009, 09:59 AM

Going today to pull the seats and other stuff out of it, will snap pics in case someone may want to buy em.

darkside · 12-13-2009, 10:01 AM

Don't remember if i already posted this or not, but the car has a B&M shifter for C4-C6 in it that i will be selling as soon as i get it pulled out.

SlowJoe · 12-13-2009, 10:18 AM

Nice find! what kind of shifter?

darkside · 12-13-2009, 10:51 AM

Right now, all i know is that it's a B&M for C4-C6 and can work on AOD with a different cable or some shit, but i won't be needing it at any point because i will be putting a 5 speed in.

When i get it out of the car, i'll look around on it, bound to be a part # or something..I'll let you know

12-12-2009, 04:14 PM	#1
darkside marlboro man Join Date: Apr 2008 Posts: 373	Darkside's 89 Notch Well, after looking around, I have finally got into another Mustang. Found this on the other side of town. Right now, it's just a roller. No engine/Trans Front clip came with it, just isn't pictured. Red interior- will be the first thing to go I also have a few parts that came with it which will be for sale soon. Well, here are the only pics I have at the moment. The notches that are cut out of the bumper and up on the firewall were for Turbo related parts, so that will need to be fixed, but it's the only real metal work that the car needs.. Not too bad for 500 bucks, clean clear title, what yall think? __________________

12-12-2009, 04:29 PM	#2
swammi magnaflow lover Join Date: Nov 2009 Location: pisgah al Posts: 150	looks good best of luck! __________________ 97 f150 lariat excab tow rig 93 mustang gt under construction

12-12-2009, 06:26 PM	#3
darkside marlboro man Join Date: Apr 2008 Posts: 373	Thanks. Those parts you have will be part of this project, as soon as i come get em lol __________________

12-12-2009, 08:02 PM	#5
darkside marlboro man Join Date: Apr 2008 Posts: 373	I'm not draggin ass on this project, i got a engine and trans lined up to get, and a long list of other stuff. First thing is the interior, gonna get all that done first. That red interior has to go. I figure i will paint most of it. Need to figure out what a lot of the wiring is on the floor under the carpet, or where the carpet should be. I know the car is wired for a trunk mount battery, so some of the cables are for that. Also, i need to figure out which computer I need for the 5 speed set up, if it matters, i think the A9L is the best computer for the fox? need to research that. Right now, my main focus is getting the front clip back on, and the interior done. I plan to start work on that tomorrow morning. __________________

12-13-2009, 09:18 AM	#6
93cobra1928 Dazed and Confused Join Date: Mar 2009 Location: Northport, Al Posts: 778	Nice find __________________ Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards

12-12-2009, 07:39 PM	#4
89five0Gt Senior Member Join Date: Dec 2006 Location: behind Skillet Posts: 1,356	nice car, especially for $500

12-13-2009, 09:59 AM	#7
darkside marlboro man Join Date: Apr 2008 Posts: 373	Going today to pull the seats and other stuff out of it, will snap pics in case someone may want to buy em. __________________

12-13-2009, 10:01 AM	#8
darkside marlboro man Join Date: Apr 2008 Posts: 373	Don't remember if i already posted this or not, but the car has a B&M shifter for C4-C6 in it that i will be selling as soon as i get it pulled out. __________________

12-13-2009, 10:18 AM	#9
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	Nice find! what kind of shifter? __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

12-13-2009, 10:51 AM	#10
darkside marlboro man Join Date: Apr 2008 Posts: 373	Right now, all i know is that it's a B&M for C4-C6 and can work on AOD with a different cable or some shit, but i won't be needing it at any point because i will be putting a 5 speed in. When i get it out of the car, i'll look around on it, bound to be a part # or something..I'll let you know __________________