01-06-2009, 04:00 PM | #21 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
and my rotating assembly is a substantial amount lighter than stock configurated size pistons and rods so rpms will come on quick
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
01-06-2009, 04:12 PM | #22 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
heres a 512 cube motor with 1 point more compress but 45 cubes smaller. From Charlie and Lem Evans...
Very impressive combo! In regards to the question posted above somewhere, I'll try to give a brief description of the engine. 1. DIVE 2 bolt main block with offset ground cast production crank. Wet sump and no vacuum pump. 2. 6.800" Eagle rods with JE pistons and a 12.8:1 compression ratio. 3. Motorsport/Edelbrock Victor intake manifold for the Dominator carbs. Plus a 1" open spacer and a 1" HVH Super Sucker spacer. 2" total. 4. Biggs 1050 3 circuit carb with 92 sq. jets on race gas. 5. Ford Duraspark SVO by MSD distributor 6. Comp Cams roller cam. It was an old one of Lem's that had been reground with the following specs; 275*/285* @ .050", .759"/.762" lift, LSA 111*, and intake centerline of 111*. 7. Ported head flow #'s Intake avg. .200=148, .300=233, .400=301, .500=335, .600=357, .700=373, .800=378 cfm. Exhaust avg. .200=116, .300=147, .400=172, .500=184, .600=222, .700=232, .800=234 cfm. 800Hp @ 6700. Torque was 680 @ 5200 Just a rather basic 512 CID engine and I'm sure there are several of you that can and have done better, none the less, this was a fairly good engine and I attribute it's good numbers to the camshaft and intake port flow. Charlie Back to top
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
01-07-2009, 12:39 AM | #23 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
Leave it alone it is plenty enough hp and torque and a lot more streetable than a maxed out 302 block and you only have 2600 lbs to move down the track it is going to be a handful as it is. just get it finished so we can bust some ass!I am tired of waiting and net gona kick your tail if you keep on she done said 700 is to much and already wanting dyno sheets to prove it is not more than that lmao she gona shut you down and I am going to have to drive it! Lol stop screwing around!
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
01-07-2009, 07:51 AM | #24 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Leave it alone...I don't wanna have to turn my boost up.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
01-07-2009, 08:01 AM | #25 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
700hp in a 2600 pound car and still gets drug down the track by a 3100 pound 5 speed Mustang on drag radials.......Damn I wouldnt want to be you
My car is waiting and makes nowhere near 700hp so with that being said. "Bring it bitch"
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
01-07-2009, 09:01 AM | #26 | |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Quote:
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
|
01-07-2009, 10:33 AM | #27 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
01-07-2009, 11:26 AM | #28 |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
Actually YOU will talk shit up until the day its supposed to go down and then you will bring your wife with you and say she wont let you race. I hope Clyde aint as whooped as you are
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
01-07-2009, 11:41 AM | #29 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
I will take u up on that biotch!lol it will take me 3 months just to get guy to finish my suspension. Hell its prob gona be turd anyway.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
01-07-2009, 11:45 AM | #30 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
bull! U knew i was on my way! And i did show up. And where was u at
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
|
|