Good tech Article

slvrbullit · 01-23-2005, 03:02 PM

Here is a good tech article for doing a 351 swap into a Fox stang.

click me

Tommy

Italian LX · 01-23-2005, 03:04 PM

Quote:

Originally Posted by slvrbullit

Here is a good tech article for doing a 351 swap into a Fox stang.

click me

Tommy

Thanks again, Tommy.

NightHawk756 · 01-23-2005, 03:43 PM

I did it once already with the coupe, you can just ask me.

Italian LX · 01-23-2005, 11:12 PM

Quote:

Originally Posted by flashbang756

I did it once already with the coupe, you can just ask me.

Okay then, Brad. . . can I use my stock fuel rails, or is the lower intake too wide for the crossovers to reach?

QWKSNKE · 01-24-2005, 04:27 AM

Brad ran a carb on his.

I say yes on the rails

Italian LX · 01-24-2005, 05:24 AM

Quote:

Originally Posted by QWKSNKE

Brad ran a carb on his.

I know... I was being a smart ass.

99LS1 · 01-24-2005, 06:24 AM

Quote:

Originally Posted by flashbang756

I did it once already with the coupe, you can just ask me.

NightHawk756 · 01-24-2005, 08:54 AM

Quote:

Originally Posted by Italian LX

I know... I was being a smart ass.

Yes, I picked up on that and decided not to answer!

Italian LX · 01-25-2005, 06:41 AM

Posting for future reference:

Quote:

Originally Posted by E-mail to Trickflow Tech Support

I currently have a TFS Track Heat intake on my 5.0L Mustang; however, I'm
working on a 351 based motor to replace it. I know the lower intakes are different for the 351's and was wondering if the 302 upper is interchangable with a 351 lower. If so, could you please let me know what the part number is for the 351 lower intake for and list price.

Thank you,
Brian Lombardi

Quote:

Originally Posted by Trickflow Tech Support

Yes, The Trackheat upper will bolt up to the 351W lower. However, The Trackheat ports are smaller than the 351W lower ports. While this is not a huge factor for a mild 351W, It does limit the powerband to approximately 5,500 rpms...

Thanks,
Art Kakiou TFS Tech Advisor
Email: akakiou@trickflow.com
Tele: 330-630-1555 ext:6324

01-23-2005, 03:02 PM	#1
slvrbullit Super Moderator Join Date: Dec 2004 Location: on the water Posts: 1,280	Good tech Article Here is a good tech article for doing a 351 swap into a Fox stang. click me Tommy __________________ 2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles

01-23-2005, 03:43 PM	#3
NightHawk756 Si vis pacem, para bellum Join Date: Dec 2004 Location: Tick-Tock, Tick-Tock....... Posts: 5,146	Re: Good tech Article I did it once already with the coupe, you can just ask me. __________________ 1989 Saleen SSC 1988 AL DPS SSP

01-24-2005, 04:27 AM	#5
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: Good tech Article Brad ran a carb on his. I say yes on the rails __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy