Billetflow supercharger pulley and idler pulley

TheJeanyus · 01-22-2006, 01:09 AM

Both get a big

from me.

The Billetflow/Reichard Racing Non-slip 2.76" blower pulley netted me as much as 120 ft lbs and 80 hp through certain parts of the power band.

Peak boost is now around 15 psi during the day when it's around 60 - 70 degrees, but it's hit 16 at around 30 degrees.

The single 100 mm idler pretty much eliminates any belt slip. LOTS of belt wrap on the supercharger pulley.

I have seen no signs whatsoever of slippage. Also, I'm not seeing any dust at all so it doesn't appear to be too hard on belts.

Doug at Billetflow was very helpful and a nice guy to deal with. Talked me out of spending the extra cash on the 4 piece idler set - the single gets the job done and the 4 piece is mainly for looks.

mustangmuscle · 01-22-2006, 09:00 AM

I love my BF stuff, also!

And, Doug was super-nice and helpful to me, too. He's a straight-shooter, who doesnt mince words about much of anything...

He went out of his way to help me, when I was in kind of a tight spot....

Just so you know and it doesnt come as a shock.....you WILL see some belt dust on your pulley and idler, in time.....just a fact. But, if the belt is aligned properly, which I'm sure yours is, the dust is a normal by-product of doing this mod. I just wipe the dust off, and keep an eye on the belt to make sure nothing weird is going on.......

TheJeanyus · 01-22-2006, 01:43 PM

Yeah I know there will be a little. There was a little bit that built up over time from the stock setup. Nothing that regular engine bay clean up doesn't take care of, and nothing excessive (meaning the belt is getting eaten up too fast).

mj_8 · 01-22-2006, 05:03 PM

Billetflow stuff rocks, Doug is a great guy to work with and makes some sweet stuff for our cars.

mustangmuscle · 01-22-2006, 05:32 PM

Quote:

Originally Posted by mj_8

Billetflow stuff rocks, Doug is a great guy to work with and makes some sweet stuff for our cars.

X Eleventy Zillion!!

lukem80 · 02-02-2006, 11:33 AM

I have the the 4 idlers... bought them off svtp message board brand new for $150... its very bling.

all my BF stuff was purchased off the message boards new/used except for the eaton hub and IRS brace..

really quality stuff here

01-22-2006, 01:09 AM	#1
TheJeanyus Administrator Join Date: Dec 2004 Location: Huntsville, AL Posts: 14,774	Billetflow supercharger pulley and idler pulley Both get a big from me. The Billetflow/Reichard Racing Non-slip 2.76" blower pulley netted me as much as 120 ft lbs and 80 hp through certain parts of the power band. Peak boost is now around 15 psi during the day when it's around 60 - 70 degrees, but it's hit 16 at around 30 degrees. The single 100 mm idler pretty much eliminates any belt slip. LOTS of belt wrap on the supercharger pulley. I have seen no signs whatsoever of slippage. Also, I'm not seeing any dust at all so it doesn't appear to be too hard on belts. Doug at Billetflow was very helpful and a nice guy to deal with. Talked me out of spending the extra cash on the 4 piece idler set - the single gets the job done and the 4 piece is mainly for looks. __________________ 1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI

01-22-2006, 09:00 AM	#2
mustangmuscle Senior Member Join Date: Mar 2005 Location: Auburn Posts: 792	Re: Billetflow supercharger pulley and idler pulley I love my BF stuff, also! And, Doug was super-nice and helpful to me, too. He's a straight-shooter, who doesnt mince words about much of anything... He went out of his way to help me, when I was in kind of a tight spot.... Just so you know and it doesnt come as a shock.....you WILL see some belt dust on your pulley and idler, in time.....just a fact. But, if the belt is aligned properly, which I'm sure yours is, the dust is a normal by-product of doing this mod. I just wipe the dust off, and keep an eye on the belt to make sure nothing weird is going on....... __________________ 04 Red Fire Cobra JLT RAI MGW Shifter Bassani cat-back Bassani catted-X MM FLSFC's BF IRS Brace Lukem80 Special Edition Hi-perf springs BF 2.76 S/C pulley SCT XCAL2 DiabloSport MAFia NGK TR6 Plugs Steg Stage 4 Eaton Afco D/P H/E Metco 2# Lower KB BAP SPEC 3+ clutch w/SPEC steel fw 60# inj's 491rwhp/504rwtq

01-22-2006, 01:43 PM	#3
TheJeanyus Administrator Join Date: Dec 2004 Location: Huntsville, AL Posts: 14,774	Re: Billetflow supercharger pulley and idler pulley Yeah I know there will be a little. There was a little bit that built up over time from the stock setup. Nothing that regular engine bay clean up doesn't take care of, and nothing excessive (meaning the belt is getting eaten up too fast). __________________ 1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI

01-22-2006, 05:03 PM	#4
mj_8 Member Join Date: May 2005 Location: Helena, AL Posts: 49	Re: Billetflow supercharger pulley and idler pulley Billetflow stuff rocks, Doug is a great guy to work with and makes some sweet stuff for our cars. __________________ RWTD TUNED - STIEGEMEIER STAGE IV - 519 RWHP / 545 RWTQ

02-02-2006, 11:33 AM	#6
lukem80 日本語 Join Date: Jul 2005 Location: Montgomery Posts: 1,661	Re: Billetflow supercharger pulley and idler pulley I have the the 4 idlers... bought them off svtp message board brand new for $150... its very bling. all my BF stuff was purchased off the message boards new/used except for the eaton hub and IRS brace.. really quality stuff here