![]() |
![]() |
#11 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: BOV to atmosphere
Quote:
![]() I was going to mention that as well |
|
![]() |
![]() |
![]() |
#12 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: BOV to atmosphere
I would have stayed SD if the tweecer or other tuner would have supported it. Since I have A VP1 EEC there is no support.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
![]() |
![]() |
![]() |
#13 |
Bet I red light B4U
|
Re: BOV to atmosphere
Sorry forgot to mention it had a maf conversion.
|
![]() |
![]() |
![]() |
#14 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: BOV to atmosphere
Marc,
Do you know if this car you are talking about was a full race car or whether he drove it on the street much
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP ![]() 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
![]() |
![]() |
![]() |
#15 |
Bet I red light B4U
|
Re: BOV to atmosphere
Ya you got a point, they said it saw very very little street use.
|
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: May 2005
Posts: 290
|
Re: BOV to atmosphere
I did it with the TwEECer. It's not perfect YET, but it's 1000 times better than it was before tweaking it. You have to relate the MAF voltage to the TPS. I also messed with the load scaling a lot to make it work.
In the end I put it back. Not worth the hassle. |
![]() |
![]() |
![]() |
#17 | |
ooooo cake!!!
Join Date: Dec 2004
Location: Saks, AL
Posts: 1,630
|
Re: BOV to atmosphere
Quote:
Yeah but I don't think it would work on a supercharged car, if you set the bov as tight as it would need to be you'd get some wicked surging since the supercharger is running off the crank. |
|
![]() |
![]() |
![]() |
#18 |
日本語
|
Re: BOV to atmosphere
I had a BOV to the atmosphere on a mod motor with a PRO-M Blow thru... that think wouldn't idle for crap. maybe if you could get a good tuner? Tim @ MPH said he hated to tune ones like that
save the "shhhhhsssssssssssss" for the import guys |
![]() |
![]() |
![]() |
#19 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: BOV to atmosphere
mine is vented to atmosphere with no drivability problems (blow thru MAF setup).
Only thing I hate is that it is loud as hell at idle and going down the road. Its very annoying |
![]() |
![]() |
![]() |
|
|