07-16-2009, 10:38 AM | #1 |
Boost! Its wats 4 dinner
Join Date: Mar 2009
Location: Bridgeport,AL
Posts: 811
|
351 5.8 Flywheel 28 oz
Is there a stock production flywheel (or does anybody have one?) that i can buy to bolt up to my 351 with a 28oz balance for my 10.5 spec stage 3 clutch in front of my tremec 3550? Any info would be helpful. I dont want to go out and spend $500 on a flywheel. I am just looking for something that will work for now cause i have to go spend $650 on stuff for my motor. Thanks, Jonathan
__________________
06 F150 crew cab 4x4 leveled on 35s 94 Lincoln Mark VIII, 3000 stall, shift kit, 3.73, hub swaped, 98 cobra wheels 06 yLincoln Zephyr- Wifeys DD |
07-16-2009, 10:57 AM | #2 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
The 351W flywheels will be 164 tooth and probably have an 11" pressure plate pattern. An early 289-302 flywheel would be the right size and balance, but it will have a pressure plate pattern for a 10" clutch.
Best bet is to get an aftermarket piece... and it isn't anywhere near $500. I can get you one for around $220. Billet Steel, 28oz...interchangable weight so you can use it on "zero" or 50oz balance motors too. There are cheaper ones online, but I'm not sure who makes them or how good they are. Lemme know.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
07-16-2009, 11:09 AM | #3 |
Boost! Its wats 4 dinner
Join Date: Mar 2009
Location: Bridgeport,AL
Posts: 811
|
Thats wat i was thinkin. Wat Brand is that?
__________________
06 F150 crew cab 4x4 leveled on 35s 94 Lincoln Mark VIII, 3000 stall, shift kit, 3.73, hub swaped, 98 cobra wheels 06 yLincoln Zephyr- Wifeys DD |
07-16-2009, 11:14 AM | #4 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
I suggest picking one up from Coupe,BUT if you want to try an auto parts store,have them look one up for a '95 Cobra R.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
07-16-2009, 06:42 PM | #5 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
$53.99 at Advance Auto Parts
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
|
|