672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot

broke · 02-21-2006, 06:29 PM

Decided to dyno the car today before I ripped the ole heaton off, and install the 2.4KB. I never knew what the car was dyno'n with the eaton/n20 and latest shot so I gave it a whirl. All pulls were done with empty tank with 5 gallons of 93 Octane and 32oz of Torco premixed in the tank. Pulled the plugs and they look pristine.

1st off thanks to XXX Motorsports in Pensacola, finally a dyno close to me.

1st pull was 618/732 tq SAE on the .048 jet which I usually run at the track a/f was rich on the big end, didnt have a way to tune it out so I decided to up the n20 jet to a 100 shot or there about .053 jet, and did the car respond like a madman.

2nd pull I threw the .053 jet in and sprayed it a lil later at 3700, didnt want to lug it down at all, and the car responded violently to 672whp 763tq SAE

STD #'s were 690whp 784tq. I think 700whp is very possible with some simple work in the tune and a slightly bigger n20 jet with the ported eaton.

Well see what happens now, KB goes on this week, plan on a small shot of sauce, alot of octane and hope she stays in one piece by the time the track rental rolls around. Had a blast last time

VIDEO ADDED

http://media.putfile.com/n20-cobra

rtusnake · 02-21-2006, 06:34 PM

Damn gotta love the torque. Who did the porting on your eaton and how well was you pleased with it?

QWKSNKE · 02-21-2006, 06:35 PM

Good Gawwd!!!!

That's awesome

TheJeanyus · 02-21-2006, 06:53 PM

I want a Steggy Stg IV so bad.

broke · 02-21-2006, 08:19 PM

Stegiemiere Engine Airflow out of St Louis, best in the business been porting blowers the longest and have the strongest #'s.

vid added

http://media.putfile.com/n20-cobra

banditmwp · 02-21-2006, 08:53 PM

ChipR4cam · 02-22-2006, 09:01 AM

Dang it. That's just crazy.

mustangmuscle · 02-22-2006, 12:33 PM

Quote:

Originally Posted by TheJeanyus

I want a Steggy Stg IV so bad.

X Eleventy Bazillion!!!!!

mustangmuscle · 02-22-2006, 12:35 PM

broke....
U gonna show me how to launch at Track Day???
I watched you hookin' at the last one........AWESOME!!!

lukem80 · 02-22-2006, 12:56 PM

guess me and pulley breaker need a freaking 100 dry shot and a port..

SHIT

02-21-2006, 06:29 PM	#1
broke Member Join Date: Oct 2005 Location: Crestview, FL Posts: 92	672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot Decided to dyno the car today before I ripped the ole heaton off, and install the 2.4KB. I never knew what the car was dyno'n with the eaton/n20 and latest shot so I gave it a whirl. All pulls were done with empty tank with 5 gallons of 93 Octane and 32oz of Torco premixed in the tank. Pulled the plugs and they look pristine. 1st off thanks to XXX Motorsports in Pensacola, finally a dyno close to me. 1st pull was 618/732 tq SAE on the .048 jet which I usually run at the track a/f was rich on the big end, didnt have a way to tune it out so I decided to up the n20 jet to a 100 shot or there about .053 jet, and did the car respond like a madman. 2nd pull I threw the .053 jet in and sprayed it a lil later at 3700, didnt want to lug it down at all, and the car responded violently to 672whp 763tq SAE STD #'s were 690whp 784tq. I think 700whp is very possible with some simple work in the tune and a slightly bigger n20 jet with the ported eaton. Well see what happens now, KB goes on this week, plan on a small shot of sauce, alot of octane and hope she stays in one piece by the time the track rental rolls around. Had a blast last time VIDEO ADDED http://media.putfile.com/n20-cobra __________________ 03 Cobra -- Sonic Blue 2.4 KB @ 23psi, IRS, Bolt On's 10.45@134

02-21-2006, 06:34 PM	#2
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot Damn gotta love the torque. Who did the porting on your eaton and how well was you pleased with it? __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")

02-21-2006, 06:35 PM	#3
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot Good Gawwd!!!! That's awesome __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

02-21-2006, 06:53 PM	#4
TheJeanyus Administrator Join Date: Dec 2004 Location: Huntsville, AL Posts: 14,774	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot I want a Steggy Stg IV so bad. __________________ 1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI

02-21-2006, 08:19 PM	#5
broke Member Join Date: Oct 2005 Location: Crestview, FL Posts: 92	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot Stegiemiere Engine Airflow out of St Louis, best in the business been porting blowers the longest and have the strongest #'s. vid added http://media.putfile.com/n20-cobra __________________ 03 Cobra -- Sonic Blue 2.4 KB @ 23psi, IRS, Bolt On's 10.45@134

02-21-2006, 08:53 PM	#6
banditmwp Welcome to America! Join Date: Dec 2004 Location: in the 11's Posts: 4,501	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot __________________ 91 GT Convertible 2006 Nissan Titan LE Crew Cab 2014 Peterbilt 337/Marion 22' box

02-22-2006, 09:01 AM	#7
ChipR4cam You can call me mister. Join Date: Jan 2005 Location: Plenty recovered. Posts: 3,518	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot Dang it. That's just crazy.

02-22-2006, 12:35 PM	#9
mustangmuscle Senior Member Join Date: Mar 2005 Location: Auburn Posts: 792	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot broke.... U gonna show me how to launch at Track Day??? I watched you hookin' at the last one........AWESOME!!! __________________ 04 Red Fire Cobra JLT RAI MGW Shifter Bassani cat-back Bassani catted-X MM FLSFC's BF IRS Brace Lukem80 Special Edition Hi-perf springs BF 2.76 S/C pulley SCT XCAL2 DiabloSport MAFia NGK TR6 Plugs Steg Stage 4 Eaton Afco D/P H/E Metco 2# Lower KB BAP SPEC 3+ clutch w/SPEC steel fw 60# inj's 491rwhp/504rwtq

02-22-2006, 12:56 PM	#10
lukem80 日本語 Join Date: Jul 2005 Location: Montgomery Posts: 1,661	Re: 672whp 763ta SAE 03 Cobra ported Eaton + 100 dry shot guess me and pulley breaker need a freaking 100 dry shot and a port.. SHIT