05-14-2007, 12:47 PM | #1 |
Member
Join Date: Apr 2007
Location: Lockport N.Y.
Posts: 37
|
Nitrous line question
I had to cut the fitting off of the main steel braided line coming from the tank during the removal of the system off the other car. It was run through the frame for some reason and the fitting would just not go through the hole that the line was run through. Anyway, my question is: Can you have another fitting attached or is the line shot.
I have some pics but they probably won't help much.
__________________
306 stock block, balanced forged internals, main girdle, cam motion custom grind, Twisted Wedge heads, GT-40 intake with port matched lower, 24# injectors, Big Shot plate kit, equal length shortys, o/r x-pipe, CAI, electric fan, A/C and smog delete, all the supporting mods. |
05-14-2007, 02:01 PM | #2 |
Daddy x4 ...we're done
Join Date: Dec 2004
Location: Oxford, AL
Posts: 11,551
|
You can have a new fitting crimped on.
__________________
-Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring |
05-14-2007, 02:05 PM | #3 |
Senior Member
Join Date: Nov 2005
Posts: 155
|
you need to call some performance shops,machine shops and/or autoparts stores in your area and ask them about repairing high pressure nitrous hose, i believe you need a 6AN fitting that will crimp to the hose. one of the places above when you call them should be able to tell you the location of a shop close to you that can repair the hose and that sell the fittings, we have one in town and this is how i found them. it can be done but they have to be a special fitting crimped with a special tool.
__________________
1995 GT,TKO500,cobra intake,pro5.0 shifter,King Cobra Clutch,Compucar n2o wetkit,BBK underdrive pulleys,custom x pipe,flowmasters,2.5" exhaust,3"chrometips,Hooker shortys,chrome Cobra R rims w/ 05 spinners,PBR double piston calipers,aluminum driveshaft,MSD coil,Accel wires,K&N filter,CAI,3.73 gears. http://www.cardomain.com/ride/2138402 |
05-14-2007, 03:25 PM | #4 |
Senior Member
Join Date: Sep 2005
Location: Boulder, CO
Posts: 463
|
I don't understand why Mr. Slave can't just tape and trim the hose, and then slip a new fitting on himself. What sort of fitting are you using Slave?
__________________
Jim Last edited by SkurdalenFox; 05-14-2007 at 03:43 PM. Reason: more-er clear-er |
05-14-2007, 03:37 PM | #5 |
Senior Member
Join Date: Jan 2006
Location: Looking for more ways to add BOOST
Posts: 167
|
Jegs or summit either one sales reusable fittings. I made all my nitrous lines.
__________________
Hauling A** on Pump Gas !!!!! |
05-14-2007, 03:54 PM | #6 |
Super Moderator
Join Date: Dec 2004
Location: on the water
Posts: 1,280
|
PM me you name and address, I have a line that you can have. It was from the dry kit I had on my car and was toooooo small for the new kit.
__________________
2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles |
|
|