12-05-2006, 06:23 PM | #1 |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
front end ????
well I installed the 95 spindles on my coupe but my front tires are rubbing the front fenders when I turn all the way to one side. I have cc plates on my car can you adjust the front tires so you can adjust the tires back to more of the center of the fender well or is there something wrong with my front end I dont know that much with front ends because I have never mest with them before maybe I have not confused ya to much. confused: Thanks Steven
__________________
Bottled 89 Coupe |
12-05-2006, 06:51 PM | #2 |
Im gonna show her my...
Join Date: Dec 2004
Location: Somewhere providing FREE tech support.
Posts: 4,269
|
No, the tires almost rub on my stock sprung 89GT. So if you have drop springs, it will probably rub. What size tires/wheels do you have?
__________________
I heard it on the internet, so it must be true. "I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent "An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein "Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown |
12-05-2006, 09:44 PM | #3 |
Halfshaft Killer
Join Date: Mar 2005
Location: The Kingdom
Posts: 3,910
|
I run 245 45's on mine and its lowered two inches and barely rubs on full lock. I believe 93 cars have more fenderwell though
__________________
03 Cobra 06 F250 (\__/) (='.'=) (")_(") |
12-05-2006, 11:18 PM | #4 |
Senior Member
Join Date: Sep 2005
Location: Boulder, CO
Posts: 463
|
91-93 fenders have a bit more wheel clearence.
You could install steering rack limiters. Ford Part # - N8048425 You can't stack the limiters though. They'll get destroyed.
__________________
Jim |
12-06-2006, 03:11 PM | #5 |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
I'm running pro stars 3.5 on front
__________________
Bottled 89 Coupe |
12-09-2006, 12:16 PM | #6 |
I got a good sugar moma
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
|
went got my frontend adjusted today seems to work pretty good took awhile to do because frontend was bad off but it's done now get her to a dyno to set everything
__________________
Bottled 89 Coupe |
12-14-2006, 04:09 PM | #7 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
I have 95 spindels on my 86 with 235/40/18 and have no rubbing issue. This is also with Motosport C springs.
http://webpages.charter.net/eecanaly...My_Mustang.JPG
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. Last edited by 86GT; 12-14-2006 at 04:11 PM. |
12-14-2006, 08:13 PM | #8 |
pro-jackstand racer
|
OMG Clint, everytime I see that pic I want to be alone with myself....
__________________
And God created Neil Peart so that lightning would make sense to the world.
~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
12-14-2006, 09:11 PM | #9 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
|
|