anyone running the x cam?

rockylammon · 12-12-2011, 07:54 PM

if so, are you still running it with stock bottom end?
and with the 1.6 rockers..did you have any clearence problems?
thanks

waypastcrazy · 12-12-2011, 08:50 PM

Quote:

Originally Posted by rockylammon

if so, are you still running it with stock bottom end?
and with the 1.6 rockers..did you have any clearence problems?
thanks

I have seen it ran on stock bottom end.I suggest always checking clearance because no 2 engines are the same deck height,gasket thickness,head deck,timing chain differences etc
Etc.Even the cam from one batch to the next could be out of spec.

jonosranger · 12-13-2011, 04:56 AM

i ran it with stock bottom end and i had edelbrock performers. worked great but like waypastcrazy said you need to check the clearances.

12-12-2011, 07:54 PM	#1
rockylammon Member Join Date: Apr 2011 Location: montgomery alabama Posts: 34	anyone running the x cam? if so, are you still running it with stock bottom end? and with the 1.6 rockers..did you have any clearence problems? thanks __________________ 87 notchback....and a few mods

12-13-2011, 04:56 AM	#3
jonosranger Boost! Its wats 4 dinner Join Date: Mar 2009 Location: Bridgeport,AL Posts: 811	i ran it with stock bottom end and i had edelbrock performers. worked great but like waypastcrazy said you need to check the clearances. __________________ 06 F150 crew cab 4x4 leveled on 35s 94 Lincoln Mark VIII, 3000 stall, shift kit, 3.73, hub swaped, 98 cobra wheels 06 yLincoln Zephyr- Wifeys DD