rpm 2 n20 plate

03slobra · 04-09-2010, 07:00 PM

does anyone make a nitrous plate that goes between the intake on an edelbrock rpm 2 intake? if so who makes it?

SilverBack · 04-10-2010, 01:37 PM

Edelbrock does.

http://www.edelbrock.com/automotive_...efi_ford.shtml

I'm pretty sure it costs some bucks.

Italian LX · 04-10-2010, 06:54 PM

NX makes some nice ones that don't have the bars running through them.

http://www.nitrousexpress.com/produc...egory=5,32,245

I have the NX105 (for the TFS-R intake) on my coupe. The only issue I had was the plumbing of the second stage; it comes up underneath the runners and needs some 90-degree fittings in order to work.

If you're interested in one of these, you may want to PM Kyle over on the HSV board. Not sure if he still does or not, but when I got mine, he sold NX stuff at a good price. I got it cheaper through him than anywhere else on the web.

Here is a link to his profile:

http://hsvracing.com/phpBB2/profile....wprofile&u=576

03slobra · 04-10-2010, 07:38 PM

thanks guys

SlowJoe · 04-11-2010, 07:45 AM

http://www.streetcarforums.com/showthread.php?t=160196

03slobra · 04-11-2010, 09:27 AM

i would buy that today but i'm not a member of that board and theres no phone# to call

SlowJoe · 04-11-2010, 11:18 AM

pm me your number and i will give it to him

04-09-2010, 07:00 PM	#1
03slobra Senior Member Join Date: Nov 2006 Posts: 488	rpm 2 n20 plate does anyone make a nitrous plate that goes between the intake on an edelbrock rpm 2 intake? if so who makes it? __________________ Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!!

04-10-2010, 06:54 PM	#3
Italian LX Daddy x4 ...we're done Join Date: Dec 2004 Location: Oxford, AL Posts: 11,551	NX makes some nice ones that don't have the bars running through them. http://www.nitrousexpress.com/produc...egory=5,32,245 I have the NX105 (for the TFS-R intake) on my coupe. The only issue I had was the plumbing of the second stage; it comes up underneath the runners and needs some 90-degree fittings in order to work. If you're interested in one of these, you may want to PM Kyle over on the HSV board. Not sure if he still does or not, but when I got mine, he sold NX stuff at a good price. I got it cheaper through him than anywhere else on the web. Here is a link to his profile: http://hsvracing.com/phpBB2/profile....wprofile&u=576 __________________ -Brian '86 Mustang GT Convertible '88 Mustang LX coupe '11 Odyssey TE '21 Insight Touring

04-10-2010, 07:38 PM	#4
03slobra Senior Member Join Date: Nov 2006 Posts: 488	thanks guys __________________ Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!!

04-11-2010, 07:45 AM	#5
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	http://www.streetcarforums.com/showthread.php?t=160196 __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

04-11-2010, 09:27 AM	#6
03slobra Senior Member Join Date: Nov 2006 Posts: 488	i would buy that today but i'm not a member of that board and theres no phone# to call __________________ Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!!

04-10-2010, 01:37 PM	#2
SilverBack Senior Member Join Date: Jun 2008 Location: Pell City, AL Posts: 418	Edelbrock does. http://www.edelbrock.com/automotive_...efi_ford.shtml I'm pretty sure it costs some bucks.

04-11-2010, 11:18 AM	#7
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	pm me your number and i will give it to him __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project