Windsor Sr.200 heads

SlowJoe · 05-05-2010, 05:19 PM

Does anyone know anything about them? what hp will they support? would they be better than my performers?

93cobra1928 · 05-05-2010, 05:38 PM

Running them on my car right now, don't know what hp level they will suppport. The performer is a good head and the weight savings is good.

If this is on your 351 stroker then I would say you need at least a Performer RPM and the Windsor Sr's would probably work well with the larger runner and 2.02 valve. My 2cents anyway

coupe · 05-05-2010, 07:21 PM

I agree. It's a bigger port, valve, etc... probably more suited to the Windsor motor unkless the Performer has some work done to it.

If it were me, I would sell BOTH sets and get either the AFR185's in the forsale section (great head) or look for a used VicJr, Canfield, Trickflow, or something along those lines.

05-05-2010, 05:19 PM	#1
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	Windsor Sr.200 heads Does anyone know anything about them? what hp will they support? would they be better than my performers? __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

05-05-2010, 05:38 PM	#2
93cobra1928 Dazed and Confused Join Date: Mar 2009 Location: Northport, Al Posts: 778	Running them on my car right now, don't know what hp level they will suppport. The performer is a good head and the weight savings is good. If this is on your 351 stroker then I would say you need at least a Performer RPM and the Windsor Sr's would probably work well with the larger runner and 2.02 valve. My 2cents anyway __________________ Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards

05-05-2010, 07:21 PM	#3
coupe Super Moderator Join Date: Dec 2004 Posts: 6,313	I agree. It's a bigger port, valve, etc... probably more suited to the Windsor motor unkless the Performer has some work done to it. If it were me, I would sell BOTH sets and get either the AFR185's in the forsale section (great head) or look for a used VicJr, Canfield, Trickflow, or something along those lines.