drag wheels with cobra brakes - Page 2

1sicklx · 11-08-2007, 12:15 AM

Quote:

Originally Posted by QWKSNKE

Spacers are only going to work for skinnies (3.5-4" wide). I don't think you can buy a thick enough spacer to run a 5" or wider wheel for the front

What about the rear?

QWKSNKE · 11-08-2007, 04:04 AM

Quote:

Originally Posted by 1sicklx

What about the rear?

the rear is not as much as a problem as the front because the rotors are a good bit smaller in diameter plus the calipers are smaller

qkjuicedpony · 11-08-2007, 04:10 AM

you only need the 1" spacers for the fronts but you have to use a 3.5" wheel with a 1.75" backspacing.

for the rear a 15"x8" wheel with a 5.5" backspacing is what you need

1sicklx · 11-08-2007, 02:32 PM

Thanks

96GTS · 11-11-2007, 09:13 PM

on an sn95, go 15x10 w/ 6.5" BS...looks better

96GTS · 11-11-2007, 09:26 PM

http://www.streetstangs.net/showthread.php?t=10496
3rd item on the list...

11-08-2007, 04:10 AM	#13
qkjuicedpony Dayuuuuuuum!!!!! Join Date: Dec 2004 Location: Dallas GA Posts: 2,933	you only need the 1" spacers for the fronts but you have to use a 3.5" wheel with a 1.75" backspacing. for the rear a 15"x8" wheel with a 5.5" backspacing is what you need __________________ 86 Mustang Gt......Mods piling up in my garage. 07 F350 dooly.....Tows my fifth wheel

11-08-2007, 02:32 PM	#14
1sicklx BamaMafia 4 Life Join Date: Feb 2005 Location: Lake View, AL Posts: 2,577	Thanks __________________ 1999 Ford F-150 Lariat

11-11-2007, 09:13 PM	#15
96GTS Mine's bigger... Join Date: Dec 2004 Location: SoCal Posts: 1,060	on an sn95, go 15x10 w/ 6.5" BS...looks better __________________ 323rwhp \| 320rwtq - 4VNA 12.13 @ 113.36 \| 1.63 60'

11-11-2007, 09:26 PM	#16
96GTS Mine's bigger... Join Date: Dec 2004 Location: SoCal Posts: 1,060	http://www.streetstangs.net/showthread.php?t=10496 3rd item on the list... __________________ 323rwhp \| 320rwtq - 4VNA 12.13 @ 113.36 \| 1.63 60'