02-26-2006, 10:54 PM | #1 |
BamaMafia 4 Life
Join Date: Feb 2005
Location: Lake View, AL
Posts: 2,577
|
Just to make sure ...
Just wanted to make sure that there won't be any clearance issues before we tear into this thing. The plan is to stick with the Ecam for the time being due to the automatic and swap it for the TFS once she does the 5 spd conversion. Will be using 6.7" pushrods and 1.6 rockers that were included in the Street Heat kit. I don't see why there would be a problem, but better safe than sorry.
E303 Duration at 050 inch Lift: 220 int./220 exh. Advertised Duration: 282 int./282 exh. Valve Lift with Factory Rocker Arm Ratio: 0.498 int./0.498 exh. lift Lobe Separation (degrees): 110 Intake Valve Lash (in): 0.000 Exhaust Valve Lash (in): 0.000 Grind Number: M-6250-E303 TFS Street Heat Basic Operating RPM Range: 2,500-6,500 RPM Duration at 050 inch Lift: 221 int./225 exh. Advertised Duration: 275 int./279 exh. Valve Lift with Factory Rocker Arm Ratio: 0.499 int./0.510 exh. lift Lobe Separation (degrees): 112 Intake Valve Lash (in): 0.000 Exhaust Valve Lash (in): 0.000 Grind Number: HR-224/339-2S-12
__________________
1999 Ford F-150 Lariat |
02-26-2006, 11:16 PM | #2 |
Senior Member
Join Date: May 2005
Posts: 290
|
Re: Just to make sure ...
You'll be good to go!
|
02-26-2006, 11:20 PM | #3 |
BamaMafia 4 Life
Join Date: Feb 2005
Location: Lake View, AL
Posts: 2,577
|
Re: Just to make sure ...
Cool, that's what I needed to hear!
__________________
1999 Ford F-150 Lariat |
02-27-2006, 04:53 AM | #4 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: Just to make sure ...
yep on what disney said
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
02-27-2006, 07:35 AM | #5 |
Friends
Join Date: Dec 2004
Location: Southern Colorado
Posts: 2,452
|
Re: Just to make sure ...
Everything will work, but I dont really understand the point in swapping the cam again later on. Why not just put the tf cam in to start with? Unless of coarse you just like having to tear the engine apart twice.
|
02-27-2006, 07:40 AM | #6 | |
BamaMafia 4 Life
Join Date: Feb 2005
Location: Lake View, AL
Posts: 2,577
|
Re: Just to make sure ...
Quote:
__________________
1999 Ford F-150 Lariat |
|
02-27-2006, 07:46 AM | #7 |
Friends
Join Date: Mar 2005
Location: McCalla
Posts: 1,241
|
Re: Just to make sure ...
They look very similar in terms of stats. You might as well go ahead and swap out the cam while you are at it. I really don't think we'll have a problem with it being an automatic.
__________________
Marc |
02-27-2006, 07:49 AM | #8 | |
Friends
Join Date: Dec 2004
Location: Southern Colorado
Posts: 2,452
|
Re: Just to make sure ...
Quote:
|
|
02-27-2006, 07:54 AM | #9 |
BamaMafia 4 Life
Join Date: Feb 2005
Location: Lake View, AL
Posts: 2,577
|
Re: Just to make sure ...
Yeah, I just looked over the recommendations on trickflow's site, she could probably get away with it for the time being ... It's still her call though.
I had originally thought that this cam was recommended with 5 spd, but that's the next cam up.
__________________
1999 Ford F-150 Lariat |
02-27-2006, 07:58 AM | #10 |
ooooo cake!!!
Join Date: Dec 2004
Location: Saks, AL
Posts: 1,630
|
Re: Just to make sure ...
I would def swap the cam while you are in there already.
|
|
|