Cam help please

SlowJoe · 12-28-2009, 07:44 PM

I am putting a 70 351w in my 68 f100. this is what i have to go with it so far preformer intake,1.7 roller rockers, 700 vac holley and a c4. what would be the best flat tappet cam for pulling and cruisin. i have been looking at the comp RV cams but want more input. thanks

qkjuicedpony · 12-28-2009, 08:01 PM

crane makes a powermax cam that is around .502/.520 lift with decent duration....I would use it if it was my motor.

Ive used them before with good success

SlowJoe · 12-28-2009, 08:07 PM

all so it will have stock converter

89five0Gt · 12-29-2009, 07:58 AM

I'm running a Crane energizer cam in my 71 Ford

12-28-2009, 07:44 PM	#1
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	Cam help please I am putting a 70 351w in my 68 f100. this is what i have to go with it so far preformer intake,1.7 roller rockers, 700 vac holley and a c4. what would be the best flat tappet cam for pulling and cruisin. i have been looking at the comp RV cams but want more input. thanks __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

12-28-2009, 08:01 PM	#2
qkjuicedpony Dayuuuuuuum!!!!! Join Date: Dec 2004 Location: Dallas GA Posts: 2,933	crane makes a powermax cam that is around .502/.520 lift with decent duration....I would use it if it was my motor. Ive used them before with good success __________________ 86 Mustang Gt......Mods piling up in my garage. 07 F350 dooly.....Tows my fifth wheel

12-28-2009, 08:07 PM	#3
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	all so it will have stock converter __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

12-29-2009, 07:58 AM	#4
89five0Gt Senior Member Join Date: Dec 2006 Location: behind Skillet Posts: 1,356	I'm running a Crane energizer cam in my 71 Ford