08-23-2007, 10:11 AM | #1 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
Valve spring questions,need help!
ok guys,here's what I've got,on my E7 heads that I'm working for my 306,I was taking the valve springs and all off last night,and was comparing my new springs/retainers that came off of a brand new set of AFR heads.(The guy I bought them from was putting stiffer springs on them,and I got a deal) they are the triple springs,and all are the same free height,and are taller than the E7 springs,but are the same O.D.,now here's the problem,the E7 springs are different heights for intake and exhaust,and have thicker retainers for the exhaust,due to the shorter spring.The AFR retainers are all the same thickness,BUT,the hole is too big for my valve locks!,the AFR springs are rated to .550 lift,and I know the E7's are rated to .500,I'm running the E303 with 93 Cobra 1.7 rr's,which I *think* should put it at about .528,the following are the ideas I came up with,(not trying to be long winded!),and wonder if any of them would work,lemme know!
1,use the AFR springs with all E7 thin exhaust retainers 2,use the two AFR inner springs inside the E7 springs to make them triple,and go back with the appropriate retainers 3,or do I need 10* valve locks? Thanks in advance!
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS Last edited by EHardy1971; 08-23-2007 at 10:41 AM. |
08-23-2007, 10:43 AM | #2 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Don't mix 'n match those damper springs with the stockers...it won't help you.
Making sure you match components on top of the valvetrain is very important. Please don't take a shortcut there.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
08-23-2007, 10:53 AM | #3 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
Best bet would be to get some OEM replacement springs, locks, and retainers. TFS makes a good set that you can get through summit
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
08-23-2007, 01:23 PM | #4 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
thanks guys!,that is why I was asking,I don't ever half ass anything on a car,let alone my baby!,I was wanting to check if those were viable solutions JIC any of you had run into this before!
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
08-23-2007, 02:09 PM | #5 | |
Senior Member
|
Quote:
I thought I was your baby?
__________________
89 LX Coupe,306 2001 Ford F150 Lightning |
|
08-23-2007, 03:15 PM | #6 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
you are!,besides,you know what I mean!
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
08-23-2007, 03:16 PM | #7 |
Senior Member
Join Date: Dec 2006
Location: behind Skillet
Posts: 1,356
|
get a room
|
08-23-2007, 05:20 PM | #8 |
Senior Member
|
__________________
89 LX Coupe,306 2001 Ford F150 Lightning |
|
|