05-26-2005, 12:17 PM | #1 |
Im gonna show her my...
Join Date: Dec 2004
Location: Somewhere providing FREE tech support.
Posts: 4,269
|
Tuning Injector Slopes
I am ready to start finally dialing in my KAMRFx's and get my gas mileage/performance back where it needs to be. Just like a good little tuner I have been clearing my EEC each time I make a fuel control change, but I have a concern that I need addressed.
In the EA documentation regarding tuning injector slopes, it states that you need to set your breakpoint to some unobtainable number and "accelerate very slowly" in order to keep the EEC on the low slope side. Purpose of this is to tune the slope between 0-3ms. Since I've got an EEC-V with adaptive strategy enabled I usually drive the car a couple of days after making a change to make sure the KAMRF tables have learned their proper corrections. So can I just change my breakpoint without clearing the EEC and datalog, or will I have to drive like a grandma for a couple of days to allow the learing process?
__________________
I heard it on the internet, so it must be true. "I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent "An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein "Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown |
05-26-2005, 01:11 PM | #2 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: Tuning Injector Slopes
I need to rework that help file. Since you have the EEC-V, the new version of the EA can calculate the slopes and breakpoint without having to do what is described in the help file.
Goto the injector slope tab and select the "PW vs Required Fuel" option. Now select the settings button on the injector slope tab. Choose the automatic option and enter in the actual injector size. Make sure to leave adaptive on and filter out any outliers in the datalog. What I mean by outliers is things like 16000RPM and so on. This procedure will find the best fit for you delivered fuel. It will not get rid of the hills and valleys in the KAMRF. The hills and valleys have to be removed by modifying the MAF curve directly. To increase fuel mileage, note where the car run at cruising speeds such as load and RPM. Now go to the fuel tables and make sure there are at 14.64. If they are not you can modify the sea level load scale or adjust the fuel table.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
05-26-2005, 01:19 PM | #3 | |
Im gonna show her my...
Join Date: Dec 2004
Location: Somewhere providing FREE tech support.
Posts: 4,269
|
Re: Tuning Injector Slopes
Quote:
__________________
I heard it on the internet, so it must be true. "I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent "An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein "Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown |
|
05-26-2005, 01:23 PM | #4 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: Tuning Injector Slopes
I uploaded the latest last night. It now save all chart settings for all charts. It also has a better refresh rate on the charts. It has a slew of new things.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
05-26-2005, 01:54 PM | #5 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: Tuning Injector Slopes
does this mean that I may be able to get some fuel economy out of my 93 again
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
05-26-2005, 06:55 PM | #6 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: Tuning Injector Slopes
You could if the AFR is dialed in for the cruising range.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
05-26-2005, 09:48 PM | #7 | |
Im gonna show her my...
Join Date: Dec 2004
Location: Somewhere providing FREE tech support.
Posts: 4,269
|
Re: Tuning Injector Slopes
Quote:
__________________
I heard it on the internet, so it must be true. "I believe that a person's moral compass can be determined by how he references free men the right to defend themselves." T. Nugent "An armed society is a polite society. Manners are good when one may have to back up his acts with his life." R. Heinlein "Never argue with an idiot. They drag you down to their level, then beat you with experience." -Unknown |
|
05-27-2005, 11:40 AM | #8 |
The Kocky One
Join Date: Dec 2004
Location: Yeah, but those cutters won't bust any walnuts.â„¢
Posts: 1,948
|
Re: Tuning Injector Slopes
__________________
For Sale: Reproduction Window Stickers, 87+ Mustangs, Cobras, Lightnings, and HD F150! Richard White 93 Cobra Kocky will be back! |
05-27-2005, 12:16 PM | #9 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Re: Tuning Injector Slopes
Quote:
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
05-27-2005, 01:41 PM | #10 | |
Member
Join Date: May 2005
Posts: 47
|
Re: Tuning Injector Slopes
Quote:
Bob
__________________
1996 GT, forged parts, vortech, ZXA3 processor, etc. |
|
|
|