03-03-2010, 01:18 AM | #31 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Head flow numbers I gave should be that at around .600 lift. Lol. Keeps us posted on your toy.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
03-03-2010, 04:28 PM | #32 |
Senior Member
Join Date: Jul 2008
Location: pinson,al
Posts: 300
|
Ok. there is absolutely no room anywhere under the car. I think I might need a blow torch, a grinder and a saw zall just to get the headers off. lol.
Anyways I think I got the casting #s. I hope they are right.D1VE6815-A2B Is that right. I could not see anything but 815 so I took paper and rubbed my dirty finger over it. Tried camera no luck, tried mirror no luck and wasn't about to try and remove the starter today.
__________________
http://i330.photobucket.com/albums/l...t/PIC-0020.jpg 1995 cobra #169 of 499 with removeable hardtop and #604 of 1003 of convertibles made. aluminium headed DSS forged 306 p1sc procharged extra goodies still stock ofcourse |
03-03-2010, 04:45 PM | #33 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Lmao!welcome to bb world. It would be better with k memb spacers. Yes you done good that is block cast number it was same from 71 thru 78. I believe.so it has dish unless it is a 429.they had flat tops. Best way to tell is measure stroke. Or eye balling crank which would require engine removal. U can measure stroke thru plug hole but is near impossible on a cramped engine bay.lolthe block will have 460 stamped on front but means nothing cause 429 and 460 used same blocks.let's assume it is a 460. It will be dished pistons and the formula I gave below will meet your goals.the weak links as power increases will be pistons and rod bolts.but I think you will be fine for now. Now.if you want to see a gain with little work.change timing chain to earlier 69 70 style or aftermarket. Get a recurved duraspark or aftermarket. And watch that bad boy wake up with little effort or cash. After that. Your nxt option will be the heads worked lol keep it simple and have fun.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
03-03-2010, 04:51 PM | #34 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
While you are in cover might as well install the cam already mentioned. You. Will be surprised. Less than 300 bucks and you will be rocking pretty good assuming the suspension all works good.lol good luck keep us posted.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
03-03-2010, 05:04 PM | #35 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
If u change cam I would suggest a pushrod upgrade. Roller rockers are not needed but a plus.sure I will think of something. What does your fuel system consist of?
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
03-03-2010, 05:12 PM | #36 |
Senior Member
Join Date: Jul 2008
Location: pinson,al
Posts: 300
|
Will the stock springs handle that cam?
__________________
http://i330.photobucket.com/albums/l...t/PIC-0020.jpg 1995 cobra #169 of 499 with removeable hardtop and #604 of 1003 of convertibles made. aluminium headed DSS forged 306 p1sc procharged extra goodies still stock ofcourse |
03-03-2010, 05:15 PM | #37 |
Senior Member
Join Date: Jul 2008
Location: pinson,al
Posts: 300
|
Not sure what size line but it has fuel cell and a holley black.
__________________
http://i330.photobucket.com/albums/l...t/PIC-0020.jpg 1995 cobra #169 of 499 with removeable hardtop and #604 of 1003 of convertibles made. aluminium headed DSS forged 306 p1sc procharged extra goodies still stock ofcourse |
03-03-2010, 05:18 PM | #38 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
I have ran it with stock springs. But they have to be in very good conditon.I suggest an upgrade not knowing condition. I would get a set of the drop in springs.for insurance.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
03-03-2010, 05:21 PM | #39 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Your fuel system should work fine for now.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
03-03-2010, 05:32 PM | #40 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
That engine in video joe posted. Is still running today with that cam on stock dove springs.been few years now but they were checked. It is a 429 dove head motor with. Cam pushrods. Timing set. Intake. And dizzy upgrade. Lol.pretty nasty little motor for just a few bolt ons.lol
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
|
|