Combo

[joker]

So guys, I think this is the combo I want to go with, you guys think it will work well?

Cam Link
Cobra 1.7 rockers
Afr 165's with 61cc combustion chamber
Trick Flow street heat intake
70mm tb
76 mm maf
24 or 30 lb injectors
Walbro 255 pump

i would use a lunati 51014 cam...or the F cam
24 lb injectors
AFPR


and the rest will work just fine

[joker]

Originally Posted by qkjuicedpony

i would use a lunati 51014 cam...or the F cam
24 lb injectors
AFPR


and the rest will work just fine

I already have the cam though, you think it will be ok? what is "wrong" about it that you would choose a different one?

[joker]

Also, would 24's support the combo spraying say a 150 shot, or mildly blown?

[joker]

It looks to me that the lunati cam you posted is basically the same as the one I posted, except the lunati appears to have a little more lift and duration on the exhaust side. Would more duration and lift on the exhaust be better for a blower/nitrous application?

the 51014 works great for blower/nitrous cars and 24 lb injectors will be fine on your car with a wet kit

[slvrbullit]

Joker, Do you want your car to make more power N/A or be bottle strong? This the main question Comp Cams asked me when I was researching a cam for my current combo, that is why it has lifts of .544intake/.566exhaust. Dot remember the exact numbers but it is gind numer 35-302-8 if you go to their site and look it up.

Here is my previous combination on a dry 100 shot:
Stock heads p&p
typhoon intake
F cam
19#ers
75mm tb and MAF
MAC Exhaust

This resulted in 322 rwhp and 460 rwtq

on the motor this made 260 rwhp and 290rwtq

just throwing some ideas with figures at ya for reference.

[joker]

Originally Posted by slvrbullit

Joker, Do you want your car to make more power N/A or be bottle strong? This the main question Comp Cams asked me when I was researching a cam for my current combo, that is why it has lifts of .544intake/.566exhaust. Dot remember the exact numbers but it is gind numer 35-302-8 if you go to their site and look it up.

Here is my previous combination on a dry 100 shot:
Stock heads p&p
typhoon intake
F cam
19#ers
75mm tb and MAF
MAC Exhaust

This resulted in 322 rwhp and 460 rwtq

on the motor this made 260 rwhp and 290rwtq

just throwing some ideas with figures at ya for reference.

I would rather make it better off the bottle, becuase if I do use the bottle, it wont be often. That is a pretty high lift. Are your pistons relief cut, or dished?

[QWKSNKE]

Originally Posted by joker

Also, would 24's support the combo spraying say a 150 shot, or mildly blown?

I say yes if you are using a wet kit. Combo looks good. 1.7's with that cam will put you at a .529 lift. Most power adder cars like a split duration cam that favors a little more lift on the exhaust side. I am not sure if nitrous does or not.

Either way, compared to a stock car your combo will do fine. I am going to say you will peak a little over 300 rwhp and about 315-320 torque. (which fill nice in a street car.

[Italian LX]

You're going to be moving your power band up with that cam so you may want to get an intake that will match it. I would recomend the TFS Track Heat.