![]() |
![]() |
#21 |
Lazy Bum
|
Comp Cam XFI Roller 230/236 .576/.571 112LSA 108ICL (intake center line) It has 4 degrees advance in it. I say this because I did not know what it meant and someone else might not either. The peak numbers might not be that higher but the power will be there sooner and the torque should be a lot nicer.
|
![]() |
![]() |
![]() |
#22 |
Senior Member
Join Date: Mar 2007
Location: anniston/saks
Posts: 1,459
|
get her ready its getting close for the throw down i might even have a suprise or two at track day if i can get my funds up!
__________________
http://i171.photobucket.com/albums/u...DSC02715-1.jpg 2004 cobra MGW shifter,spec 3+ clutch, billet flywheel, 3.75 upper pulley, banssanni exaust, 3.4 whipple, 60lb injectors, fore rails and hat, gt40 pumps, dual bypass heat exchanger. 660hp/600tq http://s171.photobucket.com/albums/u...t=M2U00182.flv 2012 f150 4x4 5.0 blk 2012 rzr LE S orange 2012 rzr LE silver/blk 2003 DSG lightning 2001 ford focus ZX3 silver |
![]() |
![]() |
![]() |
#23 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
I would call that a very healthy cam. It will "hit a lick!"
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
![]() |
![]() |
![]() |
#24 |
Lazy Bum
|
New cam and springs and electric water pump are in. However during the spring install a couple of the valves were loose. The heads need new valve guides and probably a couple of valves. I'll probably try to pull them off this weekend. In the process I will go ahead and see if they can be milled to give me another quarter point or so of compression. Also the MAF has gone bad. Luckily Les has a parts car I can take one from. Car will probably be down another three weeks.
![]() |
![]() |
![]() |
![]() |
#25 |
Senior Member
|
sounds like its coming along nicely trey.
don't suppose you know if less has any ford modular cars out there hed be willing to part out? |
![]() |
![]() |
![]() |
#26 |
Lazy Bum
|
I haven't seen any mod motor parts cars but I'll double check tomorrow.
|
![]() |
![]() |
![]() |
#27 | |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
Quote:
![]() ![]()
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
|
![]() |
![]() |
![]() |
#28 |
Lazy Bum
|
So the car runs now for the first since September. Ran into problem after problem after problem with it. Everything from machine work to assembly to wrong parts. Most of it was my own fault. I have plans on dumping the car as soon I know everything is working on it. I sold my drag radials and my upper control arms since I have no real intention of keeping the car longer than I have to. I will be headed to Henson Performance sometime in the next couple of weeks to see if it will break the 400 mark and then if I feel like taking the chance on breaking something I will see if I can borrow some drag radials and see if it will break into the 12s. Not holding my breath on either.
P.S. How long do you think I could drive around with a expired tag. ![]() Didn't bother to renew since I thought I would have the car running and sold soon than this. P.P.S. AC compressor is dead and now the weather is hot so it looks like I will be spending more money just to get rid of it. ![]() |
![]() |
![]() |
![]() |
|
|