End Gap

04 Mach1 · 07-07-2006, 08:20 PM

Tommorow I start on putting my motor back together and plan on file fitting my rings. Does .026 sound right on a superchargered application?

QWKSNKE · 07-08-2006, 04:56 AM

That's what mine is but I am thinking of going smaller (maybe around .022) when I redo mine very soon

Blown 5.0 · 07-08-2006, 07:22 AM

My top is .024, second ring is .022. Probaly have around 10,000 miles or better, Motor is 2 1/2 years old. I have not run a leak down this year, but very little oil compsution, (none if i run conventional oil). It is a 331 with forged pistions. .030 bore. hope this helps

04 Mach1 · 07-08-2006, 03:20 PM

Just finished up the bottom end I set the top between .026/.024 and the bottoms at .022/.023. My be by next week it will be back at the track.

07-07-2006, 08:20 PM	#1
04 Mach1 Bet I red light B4U Join Date: Aug 2005 Location: ANNISTON, AL Posts: 975	End Gap Tommorow I start on putting my motor back together and plan on file fitting my rings. Does .026 sound right on a superchargered application?

07-08-2006, 04:56 AM	#2
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: End Gap That's what mine is but I am thinking of going smaller (maybe around .022) when I redo mine very soon __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

07-08-2006, 07:22 AM	#3
Blown 5.0 Senior Member Join Date: Jan 2006 Location: Looking for more ways to add BOOST Posts: 167	Re: End Gap My top is .024, second ring is .022. Probaly have around 10,000 miles or better, Motor is 2 1/2 years old. I have not run a leak down this year, but very little oil compsution, (none if i run conventional oil). It is a 331 with forged pistions. .030 bore. hope this helps __________________ Hauling A** on Pump Gas !!!!!

07-08-2006, 03:20 PM	#4
04 Mach1 Bet I red light B4U Join Date: Aug 2005 Location: ANNISTON, AL Posts: 975	Re: End Gap Just finished up the bottom end I set the top between .026/.024 and the bottoms at .022/.023. My be by next week it will be back at the track.