02-12-2007, 06:02 AM | #1 |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
predictions please
I'm posting this for a friend he is looking for a ruff estimate on how fast it will run
car is a 95 GT convert with no weight reduction quote "What do you think about this combo. that Im doing for some what of a daily driver 302 , iron TFS Highport heads ported 9.5 to 10.5 comp.cam 221/230 600/600 on a112.TFS track heat intake,75mm T body,aod -E with a precision industries 2700-3000 stall 30lb/hr injectors 1 5/8 longtubes headers mac, prochamber, 2.5 Exhaust with 2 chamber flowmaster mufflers and 4.30 gears. What should this combo run , also will shift at 6000- 6500 Thanks Big E."
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
02-12-2007, 10:26 AM | #2 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
It's heavy.
I think it will go 8.30-8.40 at around 84mph in the 1/8th. Then around a 13.2 at 105 in the 1/4.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
02-12-2007, 06:43 PM | #3 |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
wow he will be very dissapointed.
he hopes for mid 12s thanks coupe
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
02-13-2007, 07:43 AM | #4 |
Super Moderator
Join Date: Dec 2004
Posts: 6,313
|
I think he will be hard-pressed to go 12's at around 3500 pounds.
The highports are nice, so is the cam...but I think he needs a 347 to round out the rest of his parts. What is the rearend gear ratio. He should have at least a 4.10-4.30. That would help him alot. 3.73's won't cut it. Heck, he might surprise me and himself. Keep us informed.
__________________
" If you can't explain it simply, you don't understand it well enough. " - Albert Einstein |
02-13-2007, 11:02 AM | #5 |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
sorry thought i listed that
he will be running 4.30s with drag radials
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
02-13-2007, 03:59 PM | #6 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
seems like a mismatched combo to me. Seems like to much cam for a 302. Is this a stock bottom end? If so, the valves and pistons are going to meet each other in a not so friendly way.
The stall may need to be a bit bigger and that car is probably going to weigh in more than 3500#'s
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
02-13-2007, 05:11 PM | #7 | |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
Quote:
all I can remember is a 72 model block and scat rods the cam numbers are total lift with 1.6 rockers
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
|
02-13-2007, 06:17 PM | #8 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
unless otherwise noted, all advertised lift #'s are with 1.6 rockers.
Kinda throws me off though, most duration figures are usually a little longer when running that much lift
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
02-14-2007, 01:17 PM | #9 |
Senior Member
Join Date: Dec 2005
Location: tallapoosa, Ga
Posts: 137
|
its a custom cam from ultradyne
cam specs are what his head ported suggested (he is a little unconventional) I too wonder if he is running enough stall so at least I'm not the only one thinking that
__________________
2008 ford edge 1999 toyota solara v6 88 mustang lx v8 conversion (my on going project ) |
|
|