StreetStangs.net  

Go Back   StreetStangs.net > Technical > Dyno Room

Reply
 
Thread Tools Display Modes
Old 06-25-2009, 06:12 PM   #1
9seccobra
All Natural
 
9seccobra's Avatar
 
Join Date: Feb 2007
Location: St. Peters, MO
Posts: 26
Solid Cam Results

Hey guys, havn't posted here in a while but figured I would share my recent dyno results with you all. I have been wanting to see what a solid roller would rev to on my setup for a while now. Finally tested a couple cams on the AFM dyno several weeks ago and here are the results showing the best one.

I am pretty happy with the way the car revs with the solid roller in there. Pulls to 9,300 rpm without a hint of valve float.

I had to export the data vs. mph and convert to rpm because we lost the tach signal during the solid tests for some reason. Hence the Excel plot. The solid cam plotted is basically the same specs as the hi-rev hydraulic cam from last year. I have generated a comparison graph at the following link http://www.the-arnolds.net/Cobra/sol...v-dyno-800.jpg

A few notes:

- The red curves are from last year (AFM Hi-Rev hydraulic and Kooks headers).
- Green is the interim test we did with the shorter custom long-tube headers designed by Mark Lelchook at Performance Welding. These headers are 1-7/8" to 2" stepped design to a 3-1/2 inch collector (about 26-29" primarey length, or approximately 10" shorter than the Kooks from last year.
- Blue is the solid cam with the custom headers.
- For the solid, I went with Pac Alloy 1326 springs set up with ~300 lb on seat and 800 lb open.

- A note on compression ratios. The solid tests were performed with a thicker head gasket putting compression a ½-point lower (14.35 to 13.85). There was some evidence the pistons were just kissing the heads from last year.

- The solid gained back almost all the torque I lost with the custom headers below 6,800.

- All in all, should pick up some at the track and I feel these results are a testament to the AFM Hi-Rev cam technology.

It has been so blasted hot here in St. Louis I havn't been able to get to the track yet.
__________________
Marc Arnold
My Cobra Page
9seccobra is offline   Reply With Quote
Old 06-25-2009, 09:27 PM   #2
QWKSNKE
3v's are slow
 
QWKSNKE's Avatar
 
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
interesting torque range, while the curve is nice I would have thought you would be pushing at least 80 more foot pounds through the entire range.

What is the cubic displacement this year. Is it still in the 360 something range or am I thinking of a different year's combo?
__________________
2009 Porsche Carrera S
2008 ///AMG C63.. Eurocharge Tune. RIP
2019 AMG GLC43..wife's
03 F250 SD.. Edge Evo, AFE Stage 1 CAI
08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's
01 Cobra vert... wife's

I need a new toy
QWKSNKE is offline   Reply With Quote
Old 06-25-2009, 09:28 PM   #3
QWKSNKE
3v's are slow
 
QWKSNKE's Avatar
 
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
by the way Marc, nice to see you stop by
__________________
2009 Porsche Carrera S
2008 ///AMG C63.. Eurocharge Tune. RIP
2019 AMG GLC43..wife's
03 F250 SD.. Edge Evo, AFE Stage 1 CAI
08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's
01 Cobra vert... wife's

I need a new toy
QWKSNKE is offline   Reply With Quote
Old 06-26-2009, 05:45 AM   #4
9seccobra
All Natural
 
9seccobra's Avatar
 
Join Date: Feb 2007
Location: St. Peters, MO
Posts: 26
It is the same 359 as last year, Lee. What we are seeing is that the Hi-Rev hydraulic cam from last year worked pretty dang good in there. My biggest reason for wanting to try the solid is that the valves were floating the last 300 feet of the race track with the hydraulic last year. Problem solved!

Work has been so damn busy I have been too active on the boards. If the car works good this year, I saw you guys were planning another track rental. We have not been able to take a vacation this year due to work, and maybe I can swing a trip down this fall. Will have to see.
__________________
Marc Arnold
My Cobra Page
9seccobra is offline   Reply With Quote
Old 06-26-2009, 05:54 AM   #5
QWKSNKE
3v's are slow
 
QWKSNKE's Avatar
 
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
Quote:
Originally Posted by 9seccobra View Post
It is the same 359 as last year, Lee. What we are seeing is that the Hi-Rev hydraulic cam from last year worked pretty dang good in there. My biggest reason for wanting to try the solid is that the valves were floating the last 300 feet of the race track with the hydraulic last year. Problem solved!

Work has been so damn busy I have been too active on the boards. If the car works good this year, I saw you guys were planning another track rental. We have not been able to take a vacation this year due to work, and maybe I can swing a trip down this fall. Will have to see.
that would be awesome Marc!!!
__________________
2009 Porsche Carrera S
2008 ///AMG C63.. Eurocharge Tune. RIP
2019 AMG GLC43..wife's
03 F250 SD.. Edge Evo, AFE Stage 1 CAI
08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's
01 Cobra vert... wife's

I need a new toy
QWKSNKE is offline   Reply With Quote
Old 07-31-2009, 07:57 PM   #6
Roosell
(say Rŭe-sell)
 
Roosell's Avatar
 
Join Date: Jul 2009
Location: Birmingham Metro
Posts: 38
Quote:
Originally Posted by 9seccobra View Post
Pulls to 9,300 rpm without a hint of valve float.
Bloody hell!
Roosell is offline   Reply With Quote
Old 08-01-2009, 07:36 PM   #7
EHardy1971
Trunk Monkey
 
EHardy1971's Avatar
 
Join Date: Jun 2007
Location: Home
Posts: 5,708
What block are you running? I know it's not a factory roller!
__________________
Eric
89 LX Coupe-Juiced
01 Lightning-Boost
06 TBSS
EHardy1971 is offline   Reply With Quote
Old 08-01-2009, 09:04 PM   #8
89five0Gt
Senior Member
 
89five0Gt's Avatar
 
Join Date: Dec 2006
Location: behind Skillet
Posts: 1,356
Quote:
Originally Posted by EHardy1971 View Post
What block are you running? I know it's not a factory roller!

FRPP R302 Block, 4.100 Bore.
Its on his link
89five0Gt is offline   Reply With Quote
Old 08-01-2009, 10:02 PM   #9
EHardy1971
Trunk Monkey
 
EHardy1971's Avatar
 
Join Date: Jun 2007
Location: Home
Posts: 5,708
Quote:
Originally Posted by 89five0Gt View Post
FRPP R302 Block, 4.100 Bore.
Its on his link
__________________
Eric
89 LX Coupe-Juiced
01 Lightning-Boost
06 TBSS
EHardy1971 is offline   Reply With Quote
Old 03-19-2010, 12:33 PM   #10
chvyeter
Junior Member
 
chvyeter's Avatar
 
Join Date: Oct 2005
Location: Enterprise, AL
Posts: 29
His combo and setup has been pretty sweet to follow. Definately impressive congrats
chvyeter is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:24 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.