351m ?

natedawgg94 · 07-02-2005, 07:10 AM

is there any parts off of anything else that will fit on a 351m. like say heads, cam, and etc .....

TheJeanyus · 07-02-2005, 07:14 AM

351 Cleveland - it's basically the same motor. I think the deck height on the block is the only difference.

99LS1 · 07-02-2005, 07:46 AM

351m is trash in comparision to a cleveland.

But, here's what I found.

Quote:

Both engine types in the 335 series (351C and M-block) share many design characteristics, but the only major component that is interchangeable between 351C and M-block engines is the cylinder head. Several internal components and accessories interchange, including camshafts, timing sets, water pumps, fuel pumps, oil pans, distributors, and thermostat housings (see the interchange table below for more details). All 335-series engines are externally balanced with a 28 oz-in imbalance on the crankshaft (the same as 302 and 351W engines up to 1982).

http://www.fordcobraengines.com/Modified%20History.htm

natedawgg94 · 07-02-2005, 10:17 AM

thanks

natedawgg94 · 07-02-2005, 10:19 AM

anyone got any suggestions on a cam for the 351m and some heads just weighing options???? it has a performer 400 intake and holley750 carb....

EZ SPEED · 07-02-2005, 10:28 AM

Quote:

Originally Posted by natedawgg94

anyone got any suggestions on a cam for the 351m and some heads just weighing options???? it has a performer 400 intake and holley750 carb....

BTW: this is for a truck, for those of you just tuning in

QWKSNKE · 07-02-2005, 11:00 AM

honestly Nathan, I wouldn't waste the money. I am sure that the costs for any mods will be absurd

streetstang88 · 07-07-2005, 08:23 AM

heads ,cam, intake...summit has a cam and lifter set that is cheap and would work great ...for less than a bill ..the performer intake and carb would make you happy for a while,but when you want more i have a motor you need to look at...351 boss if you are interested ...... rebuilt ready to go just let me know ...forged 9.5:1 flatops,lunati cam, boss high port heads ,they have massive intake ports which makes power at higher rpm ,it also has a victor high rise single plane manifold and performer carb has power stering pump and water pump belts and pulleys ,and a very will built fmx tranny w/kevlar bands shift kit and stall converter ...over 400 hp easy ... $1500 for both

natedawgg94 · 07-09-2005, 09:04 AM

that sounds good but low cash flow for the time being in the process of doing so add on home improvement. if you still have when i get that finish would be interested

streetstang88 · 07-09-2005, 03:54 PM

it aint goin' anywhere

07-02-2005, 07:10 AM	#1
natedawgg94 Senior Member Join Date: Apr 2005 Location: Ohatchee, AL Posts: 713	351m ? is there any parts off of anything else that will fit on a 351m. like say heads, cam, and etc ..... __________________ 1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing

07-02-2005, 07:14 AM	#2
TheJeanyus Administrator Join Date: Dec 2004 Location: Huntsville, AL Posts: 14,774	Re: 351m ? 351 Cleveland - it's basically the same motor. I think the deck height on the block is the only difference. __________________ 1998 Mustang GT Coupe - World's Slowest Racecar 2005 Toyota 4Runner SR5 V8 2013 Volkswagen Jetta Sportwagen TDI

07-02-2005, 10:17 AM	#4
natedawgg94 Senior Member Join Date: Apr 2005 Location: Ohatchee, AL Posts: 713	Re: 351m ? thanks __________________ 1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing

07-02-2005, 10:19 AM	#5
natedawgg94 Senior Member Join Date: Apr 2005 Location: Ohatchee, AL Posts: 713	Re: 351m ? anyone got any suggestions on a cam for the 351m and some heads just weighing options???? it has a performer 400 intake and holley750 carb.... __________________ 1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing

07-02-2005, 11:00 AM	#7
QWKSNKE 3v's are slow Join Date: Dec 2004 Location: Here and There Posts: 17,152	Re: 351m ? honestly Nathan, I wouldn't waste the money. I am sure that the costs for any mods will be absurd __________________ 2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy

07-07-2005, 08:23 AM	#8
streetstang88 Senior Member Join Date: Jul 2005 Location: confusion Posts: 184	Re: 351m ? heads ,cam, intake...summit has a cam and lifter set that is cheap and would work great ...for less than a bill ..the performer intake and carb would make you happy for a while,but when you want more i have a motor you need to look at...351 boss if you are interested ...... rebuilt ready to go just let me know ...forged 9.5:1 flatops,lunati cam, boss high port heads ,they have massive intake ports which makes power at higher rpm ,it also has a victor high rise single plane manifold and performer carb has power stering pump and water pump belts and pulleys ,and a very will built fmx tranny w/kevlar bands shift kit and stall converter ...over 400 hp easy ... $1500 for both

07-09-2005, 09:04 AM	#9
natedawgg94 Senior Member Join Date: Apr 2005 Location: Ohatchee, AL Posts: 713	Re: 351m ? that sounds good but low cash flow for the time being in the process of doing so add on home improvement. if you still have when i get that finish would be interested __________________ 1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing

07-09-2005, 03:54 PM	#10
streetstang88 Senior Member Join Date: Jul 2005 Location: confusion Posts: 184	Re: 351m ? it aint goin' anywhere __________________ '89 LX 5.0 Hatchback (light blue metallic) t-5 ,traction lock ,high volume fuel pump underdrive pulleys, chip NEEDS MORE COWBELL