06-12-2012, 07:42 AM | #1 |
Member
Join Date: Jan 2011
Posts: 82
|
Victor 5.0 Intake help.
Ok trying to get my Victor 5.0 on my 91 and the TB linkage is hitting the Fuel pressure regulator and the heater metal lines. I had one on my 88 and I didn't have this problem. Has anybody ran into this before or heard of this before?
Thanks
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
06-12-2012, 08:11 AM | #2 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Is there a t/b spacer on the intake?
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
06-12-2012, 08:36 AM | #3 |
Member
Join Date: Jan 2011
Posts: 82
|
It has an Accufab 80mm tb and EGR spacer on it. The spacer is the same thickness as the factory EGR. I don't know why its not working?
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
06-12-2012, 10:26 AM | #4 |
Dazed and Confused
Join Date: Mar 2009
Location: Northport, Al
Posts: 778
|
IIRC when using the Victor intake you can't use the metal heater hose and you need an EGR delete plate which is thinner.
__________________
Proud owner of 93 Cobra #1928 306ci Forged flat tops, Windsor Sr iron heads, FMS X-303 cam, OE Cobra upper and lower, 65mm tb, 70mm maf, 24lb injectors, BBK shorties, Summit H-pipe and Flo-bastards |
06-14-2012, 07:04 AM | #5 | |
Dayuuuuuuum!!!!!
Join Date: Dec 2004
Location: Dallas GA
Posts: 2,933
|
Quote:
I wound up cutting my own spacer to a correct thickness.
__________________
86 Mustang Gt......Mods piling up in my garage.
07 F350 dooly.....Tows my fifth wheel |
|
06-14-2012, 10:10 AM | #6 |
Member
Join Date: Jan 2011
Posts: 82
|
Well my cruise control cable was broke which was why the TB wasn't opening up all the way. So I just took the cable off and the linkage went right on. I had to bend the metal heater hoses also but it's on now. So now I'm trying to make me a Cold air to mate up to the 80mm TB! lol
I'm like y'all I think the Victor is shorter or something which throws everything off. I got it working for now but just don't have a cruise control. I can get over that! Thanks!!
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
06-14-2012, 09:40 PM | #7 |
Senior Member
Join Date: Nov 2006
Posts: 488
|
why dont u just trade me your victor for my rpm2 and anderson powerpipe it works great with my 80mm lol
__________________
Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!! |
06-15-2012, 08:46 AM | #8 | |
Member
Join Date: Jan 2011
Posts: 82
|
Quote:
Here is my Victor^^
__________________
Just your average 92 Coupe with a Cam Only 302! Drive it like you stole it because everyone dies but not everyone lives! |
|
06-15-2012, 09:04 AM | #9 |
Senior Member
Join Date: Nov 2006
Posts: 488
|
I'll see if I can get one
__________________
Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!! |
06-15-2012, 10:23 AM | #10 |
Senior Member
Join Date: Nov 2006
Posts: 488
|
Here's a few
__________________
Preston 1947 mercury 2door coupe 331w/tko 600 project 2003 f350 5in lift 6.0 with upgraded stuff!!! |
|
|