12-28-2007, 09:03 PM | #1 |
Nothing new here
Join Date: Dec 2004
Location: Senoia, GA
Posts: 2,990
|
4.6 SOHC valve seals
My father has a Lincoln Town car with the 4.6 SOHC, it need valve seals, what all is involved?
Do the cams have to be pulled? Thanks
__________________
1974 Triumph TR6 1985 Monte Carlo SS 1986 Mustang GT 2011 KIA Optima GTS |
01-16-2008, 03:11 PM | #2 |
Senior Member
|
Yes the cam does have to be pulled. I would take the head to Cylinder Head Service in Birmingham. They are cheap and do good work. They decked, cleaned, and put in new seals on the PI heads that I bought from Spencer. I think it was $150 a head, but that was 2 years ago, so I'm not positive on the price.
__________________
2012 Brembo GT: 355's, Drag Radials, Stock 1972 Gran Torino Sport: 4.11s, 4spd, 351CJ 1996 GT: 4.10s, 3800 stall, PI swapped 1995 Bronco: 302, 5spd 2017 4Runner: TRD(Turd), Stock |
01-16-2008, 04:58 PM | #3 | |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
Quote:
Yeah Craig, Todd is right. You will have to pull the cams but it isn't a big deal. Contact EZ Speed and see where it was that he got his rocker arm tool at. It works very well for reinstalling the rocker arms when you put the cams back in.
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|
|