|
02-05-2009, 06:19 PM | #1 |
Senior Member
Join Date: Jan 2008
Location: sand mountain
Posts: 463
|
Got a VIBRATION
After going to the track i notice my car was vibrating. Not to bad ,but enough to notice it. I have a aluminum drive shaft. That helped elimanate my vibration to begin with. Now it is back just not as bad. Do you have any idea what it could be.
__________________
1990 lx 302 w/trickflow intake, b-303 cam, tremec 3550 ,spec stage 3 clutch, crane 1.7 rockers, under drive pulleys, bbk full length headers, and x-pipe,3:73 gear. AND....... |
02-05-2009, 07:34 PM | #2 |
Member
Join Date: Nov 2006
Location: north miss.
Posts: 55
|
If it has a stock balancer I would be checking it for cracks and weather it tried to spit the ring off of it.
|
02-05-2009, 07:38 PM | #3 |
Mind Blowing
Join Date: Jun 2006
Location: Dawsonville Ga
Posts: 3,913
|
brake drums
pinion bearing pilot bearing gears A-arm bushings
__________________
Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project |
02-05-2009, 08:27 PM | #4 |
Senior Member
Join Date: Jan 2008
Location: sand mountain
Posts: 463
|
it has a new balancer. And it has a new pinion bearing. All new rear brakes and drums. The a arm bushings may be the problem cause they are pretty much shot guess i'll look at that
__________________
1990 lx 302 w/trickflow intake, b-303 cam, tremec 3550 ,spec stage 3 clutch, crane 1.7 rockers, under drive pulleys, bbk full length headers, and x-pipe,3:73 gear. AND....... |
02-05-2009, 08:49 PM | #5 |
Senior Member
|
u joints
__________________
86 Coupe aka the battle ship H/C/I, Nitrous, bla bla bla all on a 351 |
02-06-2009, 01:02 AM | #6 |
Senior Member
Join Date: Jun 2007
Location: bham and auburn
Posts: 337
|
i would say ujoints also.
__________________
finally got my avatar. it is the white one. |
|
|