01-25-2012, 09:55 PM | #1 |
Gizmo
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
|
357W Build
I am starting to stack parts for my 357w build. I'm still not 100% sure what I'm going to put it in, but here goes. I'm starting with a 74 block, stock crank, Ross forged rods and TRW (SRP) forged and dished pistons (Part# L2378F-30) that I bought all for $400. I think I have found a pretty good deal on some AFR 205's but I'm trying to figure out whether to go with a 58cc or 72cc combustion chamber. I'll post the pic of the piston specs below. I'm thinking based on the specs, I'll need to use the 58cc's in order to get up around 9:1 compression ratio. Opinions are welcomed and encouraged.
__________________
94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic |
01-26-2012, 07:49 AM | #2 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
58cc head assuming a non decked block will be closer to 9.5 compression with a .041 gasket. really depends on block tho could be little less.if block is not decked you could have to take up to .041 0ff the deck with those pistons.My 84 block with 69 70 year style pistons had to deck .040 to get .001 deck.
If 0 deck block it be closer to 9.8. What is your intended use drag,street cruiser,etc? Any power adders n20,boost,or NA? Pump gas or e85,etc?
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 01-26-2012 at 08:15 AM. |
01-26-2012, 07:55 AM | #3 |
Boost! Its wats 4 dinner
Join Date: Mar 2009
Location: Bridgeport,AL
Posts: 811
|
^^^^This Man Knows His Stuff!!!!!!!!
__________________
06 F150 crew cab 4x4 leveled on 35s 94 Lincoln Mark VIII, 3000 stall, shift kit, 3.73, hub swaped, 98 cobra wheels 06 yLincoln Zephyr- Wifeys DD |
01-26-2012, 08:42 AM | #4 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
01-26-2012, 05:39 PM | #5 |
Gizmo
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
|
it's gonna be a street car, I really don't have the time to go to the track ever anymore... I'm looking at a couple of options right now on power adders. If I go with the Kenne Bell I'm looking at, it'll probably go in one of the foxbody Tbirds I have, if I go with the Powerdyne that I've found, it'll go in the 94, or if I play my financial cards right, I may go with an on3Performance turbo setup, but it will be boosted on pump gas and possibly meth injection. I also wouldn't be opposed to putting it into a 92-96 F150/Gen 1 Lightning.
__________________
94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic Last edited by RedSuperRanger23; 01-26-2012 at 05:42 PM. |
01-26-2012, 08:07 PM | #6 |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Boost is very good if done correctly.
Very bad if skimped on qaulity parts that are required.I will def be following the build.
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS |
01-26-2012, 08:16 PM | #7 |
Gizmo
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
|
I plan on doing it as right as I can, I definitely hate when things are skimped on so I. I literally have not had a chance to look the motor over since dude dropped it off, so if I get to looking at it and it hasn't been balanced, I will more than likely be pulling out the stock crank for a forged piece. I know it's not necessary, but I don't want to regret anything.
__________________
94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic |
01-26-2012, 10:01 PM | #8 | |
ADDICTED TO SMALL BLOCKS
Join Date: Jan 2007
Location: lookout mt
Posts: 1,757
|
Quote:
__________________
http://alabamaopencarry.com/forum/index.php One of StreetStangs class clowns! Status:slow as hell! NORTH EAST ALABAMA STANGS Last edited by waypastcrazy; 01-26-2012 at 10:05 PM. |
|
01-26-2012, 10:08 PM | #9 |
Gizmo
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
|
I'll save that for when I finally man up and do a Dart 427W build... I'm doing this one right but still trying to be budget minded since its still just a factory block.
__________________
94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic |
01-27-2012, 09:04 PM | #10 |
Gizmo
Join Date: Jul 2006
Location: Gardendale, Al
Posts: 272
|
ok, so the deal I was quoted on a set of AFR 205 Complete 58cc (Part#1450) was $1745.00... good enough deal to go head and order or wait and go with something else?
__________________
94 Mustang GT 89 Ranger XLT 96 F150 XLT 04 Crown Vic |
|
|