StreetStangs.net  

Go Back   StreetStangs.net > Technical > Ford Pushrod Tech (5.0 & 5.8)

Reply
 
Thread Tools Display Modes
Old 12-21-2008, 01:24 PM   #1
mrmustangconvert
Senior Member
 
mrmustangconvert's Avatar
 
Join Date: Oct 2006
Location: at your moms
Posts: 407
good machine shop..

some how my main caps went missing to my 351 and i am about to buy some more. before i continue, the reason that i am not scrapping the block is because its a c9 casting 351 block with a perfect stock bore, with the shorter deck height. anyways, i am getting different main caps for the motor but i need to know where i can get it line honed or bored. not too many machine shops have the proper machines to do the job. i know there is one in huntsville, but i just want to know if there are any one local that does this kind of work. i live around the gadsden area, also if any one has any 351 main caps laying around let me know an i will buy them from you!
__________________
13.068 @ 102 with a 1.732 60 ft, 4:30 gears and drag radials, 2.5 inch exaust, x pipe w/ flowmasters, stock motor and trans
mrmustangconvert is offline   Reply With Quote
Old 12-21-2008, 01:50 PM   #2
banditmwp
Welcome to America!
 
banditmwp's Avatar
 
Join Date: Dec 2004
Location: in the 11's
Posts: 4,501
Send a message via AIM to banditmwp Send a message via Yahoo to banditmwp
dutton performance should be able to help you out...they're about halfway between gadsden and anniston
__________________

91 GT Convertible

2006 Nissan Titan LE Crew Cab
2014 Peterbilt 337/Marion 22' box
banditmwp is offline   Reply With Quote
Old 12-21-2008, 02:03 PM   #3
SilverBack
Senior Member
 
SilverBack's Avatar
 
Join Date: Jun 2008
Location: Pell City, AL
Posts: 418
+1 on Dutton

My buddy just got a 3 angle and cleanup on his trickflows by him and they look like brand new. Definitely quality work.
SilverBack is offline   Reply With Quote
Old 12-21-2008, 10:25 PM   #4
97cobrasvt
I got a good sugar moma
 
97cobrasvt's Avatar
 
Join Date: Dec 2005
Location: ON THE ROAD
Posts: 1,196
Where do you live? I use Barry's performance in Adamsville just west of Birmingham on Highway 78 or Arkadelphia hwy. He's top notch in my book and builds a ton of round track motors and has a complete machine shop as well.
__________________
Bottled 89 Coupe
97cobrasvt is offline   Reply With Quote
Old 12-22-2008, 07:35 AM   #5
yellowSVT
Senior Member
 
yellowSVT's Avatar
 
Join Date: Mar 2007
Location: anniston/saks
Posts: 1,459
or if your close to center manelys is a good shop also!
thanks robbie
__________________
http://i171.photobucket.com/albums/u...DSC02715-1.jpg
2004 cobra MGW shifter,spec 3+ clutch, billet flywheel, 3.75 upper pulley, banssanni exaust, 3.4 whipple, 60lb injectors, fore rails and hat, gt40 pumps, dual bypass heat exchanger. 660hp/600tq
http://s171.photobucket.com/albums/u...t=M2U00182.flv
2012 f150 4x4 5.0 blk
2012 rzr LE S orange
2012 rzr LE silver/blk
2003 DSG lightning
2001 ford focus ZX3 silver
yellowSVT is offline   Reply With Quote
Old 12-23-2008, 03:58 PM   #6
QWKSNKE
3v's are slow
 
QWKSNKE's Avatar
 
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
Quote:
Originally Posted by SilverBack View Post
+1 on Dutton

My buddy just got a 3 angle and cleanup on his trickflows by him and they look like brand new. Definitely quality work.
+2
He is only that does mine

http://www.duttonperformance.com/
__________________
2009 Porsche Carrera S
2008 ///AMG C63.. Eurocharge Tune. RIP
2019 AMG GLC43..wife's
03 F250 SD.. Edge Evo, AFE Stage 1 CAI
08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's
01 Cobra vert... wife's

I need a new toy
QWKSNKE is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:23 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.