01-14-2009, 03:14 PM | #1 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
roller rocke questions
ok i got me a set of scorpion 1.6 roller rockers problem is they are stub mount i have pedistal mount i know crane makes a conversion kit but its a lil on the exspensive side is there any otheroption or do i just need to sell these and buy some pedistal mount roller rockers
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
01-14-2009, 04:23 PM | #2 |
Senior Member
Join Date: Jun 2007
Location: bham and auburn
Posts: 337
|
you could buy a set of trick flow heads or afrs or something of the sort. i mean you could get a used set for a reasonable price than you can have all of the good stuff.
__________________
finally got my avatar. it is the white one. |
01-14-2009, 04:28 PM | #3 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
i have like 5 dolla's lol and i am in college i dont have anywhere near the cash it takes for some afr's i have wanted a set for about 3yrs now but never enuff dough
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
01-14-2009, 04:29 PM | #4 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
i was just wonderin if i could get the studs and screw them in or do i have to have the big fancy crane cam conversion kit
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
01-14-2009, 04:41 PM | #5 |
Trunk Monkey
Join Date: Jun 2007
Location: Home
Posts: 5,708
|
You can get the screw in studs,but you have to get the mounting bosses on the heads milled down a bit.
__________________
Eric 89 LX Coupe-Juiced 01 Lightning-Boost 06 TBSS |
01-14-2009, 05:12 PM | #6 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
yeah you are probably looking at least $100 to get your heads setup for stud mount rockers
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
01-14-2009, 05:28 PM | #7 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
crane cams make a kit that says no milling required srcrew in and bolt on and go
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
01-14-2009, 05:29 PM | #8 |
5.slo stanger
Join Date: Jan 2007
Location: oxford alabama
Posts: 735
|
i was just wondering if there is any other way i might be able to make these work ohh well i guess they are goin on sale
__________________
no mustangs anymore but i do have a 1jz swapped 83 supra |
01-14-2009, 07:40 PM | #9 |
Senior Member
Join Date: Apr 2005
Posts: 895
|
you'd be wise to keep them. what heads do you have? If they are stock, get rid of them and just go with pedestal, until you get a set of heads that are already setup for studs
|
01-14-2009, 07:45 PM | #10 |
3v's are slow
Join Date: Dec 2004
Location: Here and There
Posts: 17,152
|
he has stock heads
__________________
2009 Porsche Carrera S 2008 ///AMG C63.. Eurocharge Tune. RIP 2019 AMG GLC43..wife's 03 F250 SD.. Edge Evo, AFE Stage 1 CAI 08 GT. JBA axle back, FRPP springs, FRPP swaybars.. daughter's 01 Cobra vert... wife's I need a new toy |
|
|