EGRs - Page 2

Crzypny · 11-21-2006, 01:32 PM

Quote:

Originally Posted by natedawgg94

curious ? for you i see you have a msd 6A installed where did you mount it?

Battery was relocated to the trunk so I have it mounted where the battery/battery box should sit.

natedawgg94 · 11-21-2006, 01:55 PM

oh i haven't relocated yet the 1 on my 94 pace car is in the driver side fender well was just wondering were you put yours. got one for my gt put haven't had the chance to put it in yet. sounds like you got a decent combo on yours. putting the bcam in my gt too when i get a chance.

1sicklx · 11-21-2006, 02:14 PM

Quote:

Originally Posted by natedawgg94

putting the bcam in my gt too when i get a chance.

Beware, the 94-95 eec doesn't like the bcam very much.

slvrbullit · 11-21-2006, 07:14 PM

All you need to do Traci is go to Lowes plumbing section and find a 5/8 NPT pipe cap, screw that on to the bottom of the EGR Valve where the pipe from the header attachrd, leave all the vac lines and electrical coonnections connected and you will not have any problems. That is how my car has been running for 6 years.

natedawgg94 · 11-22-2006, 05:03 AM

Quote:

Originally Posted by 1sicklx

Beware, the 94-95 eec doesn't like the bcam very much.

i know the sn95 eec doesn't like the bcam that's also what is in the cobra had to get a tune for it to idle properly other than idle it wasn't bad.

11-21-2006, 01:55 PM	#12
natedawgg94 Senior Member Join Date: Apr 2005 Location: Ohatchee, AL Posts: 713	oh i haven't relocated yet the 1 on my 94 pace car is in the driver side fender well was just wondering were you put yours. got one for my gt put haven't had the chance to put it in yet. sounds like you got a decent combo on yours. putting the bcam in my gt too when i get a chance. __________________ 1994 Cobra Pace Car #365 of 1000 light mods 1994 mustang GT 3.55's, 331 stroker, 75mm tb, 75mm maf, mac h pipe SOLD (ole yella u will be missed ((>>. Rubbing Is Racing

11-21-2006, 07:14 PM	#14
slvrbullit Super Moderator Join Date: Dec 2004 Location: on the water Posts: 1,280	All you need to do Traci is go to Lowes plumbing section and find a 5/8 NPT pipe cap, screw that on to the bottom of the EGR Valve where the pipe from the header attachrd, leave all the vac lines and electrical coonnections connected and you will not have any problems. That is how my car has been running for 6 years. __________________ 2012 Jeep Wrangler Unlimited--- too many mods to list, about to be sitting on 1 ton axles. 2000 Ford F-350 Dually Lariat LE Crew Cab Short Box 7.3 auto 168,000 miles