Sn95 turbo 351w - Page 6

rtusnake · 09-03-2010, 10:00 PM

Nice pile of parts. What's the specs on the clutch? I feel you on the wallet lol

BLOWN95GT · 09-04-2010, 12:19 AM

Quote:

Originally Posted by rtusnake

Nice pile of parts. What's the specs on the clutch? I feel you on the wallet lol

It is still a 10.5 inch but it has brass pucks on both sides, I told the guy I wanted something that would be good for between 650-750hp. He built this and told me to make sure I had plenty of room between me and the car in front of me before I take off, and be ready for the dash to land in my lap. I got a really good deal on it. As far as the back pocket goes I really hope this turbo stuff is all its talked up to be.

BLOWN95GT · 09-08-2010, 11:14 AM

UPS just made the parts pile bigger!!

I finally got the rods, and pistons from dss

Next stop is the machine shop!

ncontt · 09-08-2010, 06:13 PM

bling bling

BLOWN95GT · 10-01-2010, 03:03 PM

Got my block and other parts back from the machine shop this morning, will probably start putting the motor back together sunday

BLOWN95GT · 10-07-2010, 08:45 PM

got most of the motor together, got the pistons and rods in. Went to install the main girdle and discovered I got a 351w girdle and 302 studs so just put a couple of bolts in the oil pan for now. I got the cam in and the heads on and discovered I need longer pushrods so the valve covers are just sitting but Im almost there just need a few more parts.
Here is some more eye candy for ya.

SlowJoe · 10-07-2010, 09:08 PM

i like that oil pan

ncontt · 10-08-2010, 05:12 AM

BLOWN95GT · 10-08-2010, 07:12 AM

Quote:

Originally Posted by joecoupe

i like that oil pan

Thanks again

kinda sets the whole thing off!

BLOWN95GT · 10-08-2010, 06:48 PM

A little more progress this afternoon!

09-03-2010, 10:00 PM	#51
rtusnake Halfshaft Killer Join Date: Mar 2005 Location: The Kingdom Posts: 3,910	Nice pile of parts. What's the specs on the clutch? I feel you on the wallet lol __________________ 03 Cobra 06 F250 (\__/) (='.'=) (")_(")

09-08-2010, 06:13 PM	#54
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	bling bling __________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

10-07-2010, 09:08 PM	#57
SlowJoe Mind Blowing Join Date: Jun 2006 Location: Dawsonville Ga Posts: 3,913	i like that oil pan __________________ Slow Joe Racing 2008 dodge ram 5.7 HEMI 1993 lx with a 289 and a 3 speed on the floor WTB 1955 t-bird project

10-08-2010, 05:12 AM	#58
ncontt pro-jackstand racer Join Date: May 2005 Location: Milner, Ga Posts: 2,473	__________________ And God created Neil Peart so that lightning would make sense to the world. ~~~~~~~~~~~~~~~~~~~~~~~~~~~

09-08-2010, 11:14 AM	#53
BLOWN95GT Senior Member Join Date: Mar 2010 Location: Oneonta, Alabama Posts: 401	UPS just made the parts pile bigger!! I finally got the rods, and pistons from dss Next stop is the machine shop!

10-01-2010, 03:03 PM	#55
BLOWN95GT Senior Member Join Date: Mar 2010 Location: Oneonta, Alabama Posts: 401	Got my block and other parts back from the machine shop this morning, will probably start putting the motor back together sunday

10-07-2010, 08:45 PM	#56
BLOWN95GT Senior Member Join Date: Mar 2010 Location: Oneonta, Alabama Posts: 401	got most of the motor together, got the pistons and rods in. Went to install the main girdle and discovered I got a 351w girdle and 302 studs so just put a couple of bolts in the oil pan for now. I got the cam in and the heads on and discovered I need longer pushrods so the valve covers are just sitting but Im almost there just need a few more parts. Here is some more eye candy for ya.

10-08-2010, 06:48 PM	#60
BLOWN95GT Senior Member Join Date: Mar 2010 Location: Oneonta, Alabama Posts: 401	A little more progress this afternoon!