01-30-2006, 07:47 AM | #51 | |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: New Binary Editor
Quote:
By the way the F3 adapter works well with pcm's that the F1 does not support.
__________________
'14 Dodge Challenger SRT8 392 6-speed |
|
01-30-2006, 09:43 PM | #52 | |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: New Binary Editor
Quote:
This was in Cal Edit that you saw this in? You might have to start with a fresh binary and make all of the chnages again. Some how it got corupt. I used PCMX to make all of my binary edits. I have used TunerPro on a few parameters and seems to work. I have yet to try a fresh binary from TunerPro.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
|
01-30-2006, 10:56 PM | #53 | |
Member
Join Date: Oct 2005
Posts: 48
|
Re: New Binary Editor
Quote:
NOTE!! The data looks OK in CalEdit when I look at it BUT there are bytes that are changed that don't show up in CalEdit, and the resultant bin from TunerPro corrupted the crap out of my Tweecer - I still can't get CalCon to log correctly!! I doubt anyone else has done a tune entirely in TunerPro as I have - especially MAF curves since I was the first one to find that the file wouldn't work in CalEdit due to integer format for "Y" values. I hope someone can verify this since I'm no expert in digital engineering. Mechanical - yes, electrical - yes, digital - NO! just learning... Edit: Also note that I took the SAME A9L starting file and changed ALL of the scalars for my current tune in TunerPro & then copied all the functions in CalEdit and the tune works fine also. No bytes got filled "out-of-place" when I just changed scalars. Oh, and I hope I'm not coming across like a grump - just that I've been sick as a dog for a week and i had a little while beween raindrops to burn my new tune and it was nothing but trouble - I don't mean to take it out on anybody |
|
01-31-2006, 08:32 AM | #54 |
Member
Join Date: Mar 2005
Location: Sacramento California
Posts: 449
|
Re: New Binary Editor
I will try making a change to my bin in the MAF area to see if it works when I get home tonight.
__________________
EEC Analyzer A9M, TwEECer, 306ci, 73mm C&L w Tuner Tube, Cobra Intake, 42# inj, Edelbrock 6037, E303 cam, 155 fuel pump, FPR, 70mm TB, E-Fan, 3.55 gears, Powerdyne 9psi actual 5psi...way more. |
01-31-2006, 09:04 AM | #55 | |
5.0 Block/Walnut Cracker
Join Date: May 2005
Location: Working....
Posts: 2,409
|
Re: New Binary Editor
Quote:
__________________
'14 Dodge Challenger SRT8 392 6-speed |
|
01-31-2006, 12:50 PM | #56 |
Junior Member
Join Date: Aug 2005
Posts: 29
|
Re: New Binary Editor
Currently the 'Item Finder' tool and 'Difference' tool in TunerPro will not work for functions, Mark is aware of this and hopefully will release a fix soon.
|
01-31-2006, 06:34 PM | #57 | |
Member
Join Date: Oct 2005
Posts: 48
|
Re: New Binary Editor
Quote:
|
|
|
|